Struck by rolling powered vehicle or machinery · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at ADUSA Distribution, LLC, 1315 Tolland Turnpike, MANCHESTER, CONNECTICUT 06042
on — Fractures , affecting the Forearm(s).
Final narrative
An employee was at ground level, using a reach tool to pull down a loose cardboard slip sheet from a fourth level rack slot. Upon releasing the slip sheet, it fell and depressed the accelerator of an electric utility cart, causing the cart to begin to drive away and strike the corner of the racking. The employee's lower left arm was caught between the cart and the racking. The employee was hospitalized with a fractures to their radius and ulna, and required surgery.
Hospitalized Forearm(s) Industrial vehicle, material hauling and transport powered, unspecified
An employee was traveling down a center aisle in a forklift. While making a left-hand turn the forklift struck a bollard. The employee's left foot was crushed between the bollard and equipment.
An employee was training another employee to use a pallet jack. The pallet jack rolled into the first employee, who suffered a broken pelvis and ankle.
An employee was traveling through an aisle on a forklift when it skidded on a powder substance that was on the floor and struck a storage rack. The employee's left ankle was broken in five places.
An employee was operating a powered pallet jack. As he was turning in a warehouse aisle, his left ankle was pinned between the pallet jack and a product.
An employee was was exiting a car they were detailing when a malfunction caused it to move. The employee was pinned between the car door and a pole, suffering a lower left leg fracture and crushing injuries.
An employee was operating a tug that had been re-tagged due to faulty brakes. As the employee approached the designated parking area, he slowed the tug using the clutch and then exited the tug. He went to stop the tug from colliding with a concrete wall when his right ankle became caught between the tug and a parking stall barrier. He sustained a fractured ankle and was hospitalized.
An employee was on a tugger. He was backing up to pick up a stack of pallets. While aligning the tugger with the pallets, his left leg was caught and broken between the tugger and a storage rack.
An employee was operating an electric pallet jack. While standing beside the equipment, the pallet jack lurched forward, pinning the employee's leg against racking. The employee was hospitalized with a fractured right ankle.
More severe injuries in this industry (NAICS 493110)
On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.
An employee was operating an extruder and performing a spool swap over from the right spindle to the left spindle. After rewiring the new spool, the employee's clothing got caught in the turning shaft when the left spindle started back up. The employee's left arm was pulled into the machine, resulting in a fractured humerus and lacerations to her triceps. She was hospitalized and required surgery.
An employee was resetting a warehouse racking system utilizing an order picker. They fell approximately 5 feet from the order picker to the concrete floor and sustained fractured ribs.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.