105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Emery Sapp & Sons

Struck by dislodged or detached object(s) · Fractures and surface, flesh wounds

Federal OSHA recorded a severe workplace injury at Emery Sapp & Sons, 1500 Richmond Rd, STILLWATER, OKLAHOMA 74074 on — Fractures and surface, flesh wounds , affecting the Arm(s) unspecified.

An employee was preparing to replace links in the track of a dozer. As he was setting up a hydraulic press tool and working to get it in the right position, a coupling on a hydraulic hose gave way. The coupling struck the employee's right arm, resulting in lacerations and a fracture.

Hospitalized Arm(s) unspecified Clamps, couplings

Emery Sapp & Sons

On August 18, 2024, at 7:30 PM, an employee loaded a milling machine onto a lowboy trailer. While raising the lowboy deck, the welds broke on the trailer and the trailer dropped to the ground, landing on the employee's right foot. The employee's foot was crushed and multiple bones were broken.

Emery Sapp & Sons

An employee was retrieving rigging straps to begin rigging a stack of wooden and concrete forms to be lifted via an excavator boom off a bridge deck. While retrieving the straps, he stepped between the stack of forms and the excavator boom. At this time, the excavator shifted, causing the boom to shift and strike him in the head and neck area. The employee suffered a nondisplaced fracture to the jaw, a fracture on the right facial orbital area, and a neck laceration on his left side.

Emery Sapp & Sons

An employee was checking the coolant level on the dump truck after it had been repaired earlier that day. As he was on the front wheel of the truck to remove the radiator cap, the employee was sprayed, causing him to lose his balance. The employee fell approximately 3 feet to the ground and sustained a right ankle fracture and dislocation.

EMERY SAPP & SONS

An employee was cutting a 2x4 with a circular saw and amputated their left index fingertip.

Emery Sapp & Sons

An employee was walking to his car when he slipped on black ice and broke his hip.

View Emery Sapp & Sons's full OSHA safety record →

NATIONAL MILL MAINTENANCE, LLC

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

C. Miller Drilling Inc

A service crew was pulling a pump and motor from a well. After breaking a joint of pipe loose from another joint, an employee grabbed the chain tongs to prevent the pipe from spinning in the well, so the crew could continue taking it apart. The bolt that attaches the chain to the handle of the chain tongs broke, causing the chain to swing around and strike the employee's lower right leg. The chain severely punctured his leg and fractured his tibia.

Rolling Frito-Lay Sales, LP

An employee was using a handheld grinder to cut a bolt. The grinding wheel broke apart and a fragment struck the employee s right hand, causing a laceration to the palm near the little finger.

Blackburn's Fabrication, Inc.

An employee was operating a brake press when the top die broke, causing the bottom die to roll out and onto the employee's legs. Both of the employee's legs were crushed below the knee, and both legs were partially amputated. The employee's left leg was also fractured above the knee.

Textron Aviation Inc. (Orlando Service Center)

A pressurized aircraft nose landing gear strut assembly was being disassembled. The gland nut dislodged under pressure and made contact with an employee's left hand, breaking it.

Cashless Tolling Constructors

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

Anderson Columbia Co., Inc.

An employee was cleaning out an inlet pipe in a stormwater structure. The employee stepped back, fell into the pipe, and landed on concrete 13 feet below, at the bottom of the structure. He suffered a broken back.

FLATIRON CONSTRUCTION CORP.

A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.

Warner Brothers, LLC

An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.

Don Martin Corporation

An employee was working with paving equipment and heard a noise on the opposite side of the machine he was working on. When the machine stopped, the employee went to the opposite side and crouched down to investigate the noise. A mini track loader backed up and drove over the employee's leg. The employee sustained fractures to their lower leg, ankle, and foot.

Rae Corporation

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

Meeco Sullivan

An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.

Edward Jones Investments

An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.

Burgess Manufacturing of Oklahoma Inc.

An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.