Hornady Manufacturing

An employee tripped over elevated caulking between slabs of concrete and fell to the ground, suffering a broken right femur.

An employee was operating a machine when his middle fingertip was caught and amputated between two moving steel plates.

An employee was operating the Pierce and Prime Line. A primer got jammed in the line and the employee used a tool to try and unjam the line. The tool set off the primer and the adjacent primers causing a minor explosion. The employee was hospitalized with abrasions and lacerations to their face and body.

An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.

An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.

An employee was riding a four-wheeler while moving cattle into another pen when they were thrown off the vehicle and landed on the ground. The employee sustained fractures to their upper arm, pelvis, and right leg.

An employee was moving a stand-up powered industrial truck from a warehouse to a service area. During a turn on a slight decline, the vehicle's steering chain broke and the vehicle spun. The employee fell off the vehicle and landed on his right knee, breaking his fibula.

Two employees were operating a paving machine at approximately 1 mile per hour. The paver made a sudden turn, that threw the injured employee off balance. He reached for the handhold next to him and missed, falling 6 inches off the platform to the ground. The adjustable handle for the wing on the paving machine went between his left-hand fingers with the full weight of his body. The employee suffered a closed fracture of the fourth metacarpal bone in his hand.

An employee was clearing a firearm that had a jam in it. To disassemble the firearm, the employee was required to pull the trigger to remove the slide. During this process, the firearm discharged and the employee suffered a bullet wound to his left hand.

On July 10, 2024, an employee developed a heat-related illness and was hospitalized with dehydration.

An employee was manually adding soda ash into a tank of heated water while on a mobile ladder. The fluid in the tank began to boil over the sides. The employee went to exit the mobile ladder to avoid the boiling liquid that was beginning to contact their lower legs. The employee lost balance and fell approximately 4 feet to the concrete below. The employee was hospitalized and had surgery for a dislocated left knee and thermal burns to the lower portion of both legs.

An employee was changing the bit on a horizontal gun drill. The wrench slipped while tightening a collet and the employee's left little finger was fractured and partially amputated.

An employee was cleaning off metal flakes from a broaching machine/metal shaver when the machine activated and the blade cycled. The machine contacted the employee's finger, resulting in a fingertip amputation.

An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.

An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.

An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.

An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.

An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.