EASTMAN KODAK COMPANY

During a machine restring-up operation, the employee at the unwinder opened an access door in an elevated work platform to re-thread the machine and turned around. When he turned back, he stepped into the access opening and fell three feet. The employee's lower right leg was fractured.

An employee was pouring material into a vessel containing xylene and butanol when a flash fire occurred, burning the employee's face, ear, and neck.

An employee was performing maintenance on an HVAC unit. While manually turning the pulley to install a belt on the unit, the employee pinched the left index finger.

An employee was walking past a crossover conveyor when a ramp came down and hit them in the back. The employee sustained a broken back vertebra, as well as a concussion, and was hospitalized.

An employee was unloading frameless mirrors from a trailer. When unstrapped, the mirrors fell over onto the employee, who suffered a skull fracture, a brain bleed and blood clot, a broken left ankle, and lacerations.

A temporary employee was rigging secondary steel when the steel joist fell to the ground and struck his lower left leg, resulting in fractures to the tibia and fibula.

Two maintenance employees were dismantling a machine part (steel cylindrical rollers) on the ground. After unbolting a portion, part of the assembly fell approximately 6 inches onto one employee's left little finger. The employee was hospitalized and about 3/4" of their little finger above the top joint was surgically amputated.

An employee was stacking a pallet when the pallet fell, injuring her left leg. She was hospitalized and had surgery on her left leg.

An employee was operating a press machine when the press fractured and lacerated four fingers, requiring hospitalization and surgery. The machine was not guarded at the time.

An employee was assembling equipment. He was making a controlled adjustment to a pneumatic cylinder by slowly adding air pressure. As the pressure built, one of the safety latches dis-engaged, causing the cylinder to move suddenly and crush the employee's left middle finger against a mounting bracket. The employee's fingertip was partially amputated.

An employee was cleaning rotating parts on a print press using a rag. The rag was caught in a pinch point and her hand was pulled into the machine, resulting in a right middle fingertip amputation.

An employee was retrieving a tool from an envelope inserting machine. A belt pulled the employee's hand into the machine's gears, causing multiple finger amputations.

An employee and an assistant were disassembling two weldments that were approximately 6-feet tall, 3-feet wide, and 550 pounds. The weldments were held together by a connecting beam and tie bar. The first weldment was top strapped with an overhead crane to support the assembly and the second weldment was left free-standing. The employee removed the connecting beam and turned to walk away. One of the weldments tipped over onto the employee, causing them to fall to the ground and become pinned beneath the weldment. The employee sustained a compound fracture of the left leg and bruising to their torso and arm.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.