PHB Inc.

An employee pulled out a bucket of hot oil from under the fryer. The employee then stood on the table to clean the back wall. He stepped down into the bucket of hot oil, resulting in third-degree burns to his left leg.

An employee was performing maintenance under a kettle. When he removed a tri-clamp on a transfer line, the hot fat and broth material in the kettle poured out onto his arm. The employee was hospitalized with burns.

After completing a run with an oil distributor truck, an employee was working to return (suction) the hot oil to the tank of the truck. When the employee opened one of the valves, hot oil (approximately 385 degrees) sprayed their face, resulting in first-, second-, and third-degree burns.

An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.

An employee was using a water hose to clean debris out of the outfeed of a log conditioning vat. Water began entering the vat from the adjoining vat through a void in the separation wall at the infeed of the vats. As the employee was exiting the vat he had been working in using the access opening at the outfeed, hot water exiting the access opening entered the top of his protective hip wader. It pooled at the bottom of the wader and burned his left foot and ankle.

An employee was using a box cutter when it cut the tip of his left thumb resulting in a fingertip amputation.

An employee was loading components into fixtures on an automated CNC Line. He was moving a J-Hook lifting apparatus by hand from its storage location to the raw material area in order to pick up a piece of steel. The employee had the crane remote and the neck of the J-Hook apparatus in his right hand. When he went to set the J-Hook down on the floor, he placed his left middle finger inside of the lifting loop of the magnet. As he manually lowered the J-Hook to the floor by the neck, it fell. As the neck dropped to the floor, the magnet shifted and the lifting loop of the magnet retracted into the bracket of the J-Hook, fracturing and amputating the fingertip.

An employee was operating a two-handed punch press. When the foot pedal was actuated, the machine cycled and came down onto his left hand causing severe lacerations to the index, middle, and ring fingers to the bone.

An employee was cutting material on a band saw and amputated his left ring fingertip.

An employee was operating a stamping machine. Their right index finger was caught in the die as it cycled, resulting in amputation of the finger.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.