OSHA Inspection: WINDWARD ROOFING & CONSTRUCTION, INC.

Issued

2016-11-09 00:00:00

Abate by

2016-11-16 00:00:00

Penalty

Initial $12346.00 · Current $3750.00 Reduced

General-duty citation text

29 CFR 1926.501(b)(10):  Each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system:      a)  On September 22, 2016, employees were not protected from the hazard of falling while performing roofing work on low-sloped roof with a height of approximately 40 feet.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

2016-11-09 00:00:00

Abate by

2016-11-16 00:00:00

Penalty

Initial $12346.00 · Current $3750.00 Reduced

General-duty citation text

29 CFR 1926.502(f)(4): Mechanical equipment on roofs was used or stored in areas where employees were not protected by a warning line system, guardrail system, or personal fall arrest system:    a)  On September 22, 2016, employees were not protected from the hazard of falling while operating mechanical equipment along the edge of the low-sloped roof with a height of approximately 40 feet.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.