Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: BEST GRANITE AND MARBLE LLC

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of BEST GRANITE AND MARBLE LLC in 2 LINCOLN AVE., LAKE HIAWATHA, NJ 07034 (NAICS 238140). OSHA activity number 343530887.

Watch Best Granite AND Marble LLC — free Get an email when a new federal OSHA severe-injury report for Best Granite AND Marble LLC is published. One employer, no account, unsubscribe in one click.
Site address
2 LINCOLN AVE.
City
LAKE HIAWATHA
State
NJ
ZIP
07034
Mailing
578 SUMMER AVE., NEWARK, NJ 07104
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
4
Ownership type
A

7 citations on file for this inspection.

1910.1200 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2772.00 · Current $2772.00
29 CFR 1910.1200(e)(1) as referenced by 29 CFR 1926.59: The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  a)  Company office at 578 Summer Ave., Newark, NJ and worksite at 2 Lincoln Avenue, Lake Hiawatha, NJ  The employer did not develop and implement a hazard communication program for employees who dry cut granite cladding containing respirable crystalline silica.    Violation occurred on or about 10/5/18 .
Recent events (1)
  • — Z (S) $2772

1910.1200 G08

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(g)(8): The employer did not maintain copies of the required safety data sheets for each hazardous chemical in the workplace:  a)  Company office at 578 Summer Ave., Newark, NJ and worksite at 2 Lincoln Avenue, Lake Hiawatha, NJ  The employer did not have a safety data sheet for granite (over 1 percent crystalline silica) for employees who dry cut granite cladding.    Violation occurred on or about 10/5/18 .
Recent events (1)
  • — Z (S) $0

1926.1153 I01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.1153(i)(1): The employer did not include respirable crystalline silica in the program established to comply with the hazard communication standard (HCS) (29 CFR 1910.1200):    a)  Company office at 578 Summer Ave., Newark, NJ and worksite at 2 Lincoln Avenue, Lake Hiawatha, NJ  The employer did not include information on respirable crystalline silica ina hazard communication program for employees who dry cut granite cladding containing over one percent silica.    Violation occurred on or about 10/5/18 .
Recent events (1)
  • — Z (S) $0

1926.1153 C01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2772.00 · Current $2772.00
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.  a)  Company office at 578 Summer Ave., Newark, NJ and worksite at 2 Lincoln Avenue, Lake Hiawatha, NJ  Employees used a Makita angle grinder with a Dust Director shroud connected to a Ridgid WD09701 shop vacuum to dry cut slots in granite cladding.  The employer had not assessed the workers exposure to respirable crystalline silica.  Violation occurred on or about 10/5/18 .
Recent events (1)
  • — Z (S) $2772

1926.1153 D02 I

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section:  a)  Company office at 578 Summer Ave., Newark, NJ and worksite at 2 Lincoln Avenue, Lake Hiawatha, NJ  The employer had not assessed the exposure to respirable crystalline silica of workers who used a Makita angle grinder with a Dust Director shroud connected to a Ridgid WD09701 shop vacuum to dry cut slots in granite cladding.  Violation occurred on or about 10/5/18 .
Recent events (1)
  • — Z (S) $0

1926.1153 G01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2772.00 · Current $2772.00
29 CFR 1926.1153(g)(1): The employer did not establish and implement a written exposure control plan:  a)  Company office at 578 Summer Ave., Newark, NJ and worksite at 2 Lincoln Avenue, Lake Hiawatha, NJ  The employer did not establish and implement a written exposure control plan for exposure to respirable crystalline silica covering employees who dry cut granite cladding containing over one percent silica.    Violation occurred on or about 10/5/18 .
Recent events (1)
  • — Z (S) $2772

1926.1153 G04

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.1153(g)(4): The employer did not designate a competent person to make frequent and regular inspections of job sites, materials, and equipment to implement the written exposure control plan:  a)  Company office at 578 Summer Ave., Newark, NJ and worksite at 2 Lincoln Avenue, Lake Hiawatha, NJ  The employer did not establish a competent person to implement a written exposure control plan for exposure to respirable crystalline silica covering employees who dry cut granite cladding containing over one percent silica.    Violation occurred on or about 10/5/18 .
Recent events (1)
  • — Z (S) $0

View BEST GRANITE AND MARBLE LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343530887.