1,224,460Inspections Most recent open 2026-07-13 Last loaded 2026-07-16
Safety Incidents OSHA Severe Injury Reports · 2015–2025

ADAIRSVILLE, GA —

OSHA Inspection: LG HAUSYS AMERICA, INC.

Referral inspection · Safety discipline

At a glance

On , OSHA opened a referral safety inspection of LG HAUSYS AMERICA, INC. in 310 LG DRIVE SE AUTO SKIN, ADAIRSVILLE, GA 30103 (NAICS 326130). OSHA activity number 344167671.

Watch LG Hausys America, INC. — free Get an email when a new federal OSHA severe-injury report for LG Hausys America, INC. is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
LG HAUSYS AMERICA, INC.
Site address
310 LG DRIVE SE AUTO SKIN
City
ADAIRSVILLE
State
GA
ZIP
30103
Mailing
310 LG DRIVE SE, ADAIRSVILLE, GA 30103

What kind of inspection was it?

Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B

When did the case open and close?

Opened
Closing conference
Case closed
Last modified
Data loaded

Establishment context

NAICS code
326130
Employees
46
Ownership type
A

Citations

5 citations on file for this inspection.

1910.28 B06 I

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $8335.00 · Current $8335.00

General-duty citation text

29 CFR 1910.28(b)(6)(i): Each employee less than 4 feet (1.2 m) above dangerous equipment was not protected from falling into or onto the dangerous equipment by a guardrail system or a travel restraint system, unless the equipment is covered or guarded to eliminate the hazard.      a) Production- Calender Area, Autoskin Plant: On or before July 19, 2019, and at times prior, the employer exposed employees to caught-in hazards caused by dropping onto a running machine (rollers) capable of causing injury and impairment. There was no cover on the work platform for the rollers.
Recent events (2)
  • — I (S) $8335
  • — Z (S) $8335

1910.147 C06 I

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $10419.00 · Current $10419.00

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:   a) Production- Calender Area, Autoskin Plant: On or before July 19, 2019, and at times prior, the employer exposed employees to caught-in hazards, in that the employer did not review the specific lockout tagout procedure for employees working on equipment such as, but not limited to, the Calender.
Recent events (2)
  • — I (S) $10419
  • — Z (S) $10419

1910.212 A01

Deleted Serious Gravity 10 1 instance 10 exposed
Issued
Abate by
Penalty
Initial $13260.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:   a) Production- Calendar Area, Autoskin Plant: On or before July 19, 2019, and at times prior, the employer exposed employees to caught-in hazards, in that the employer did not provide a guard to protect employees from ingoing nip points while working on equipment such as, but not limited to, the Calendar.
Recent events (2)
  • — I (S) $0
  • — Z (S) $13260

1910.216 C01

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $13260.00

General-duty citation text

29 CFR 1910.216(c)(1): Safety tripod, cable, or wire center cord shall be provided across each pair of in-running rolls extending the length of the face of the rolls.  It shall be readily accessible and operate whether pushed or pulled.  The safety tripping devices shall be located within reach of the operator and the bite.    a) Production- Calendar Area, Autoskin Plant: On or before July 19, 2019, and at times prior, the employer exposed employees to caught-in hazards, in that ingoing nip points created by rollers do not have an effective safety cable or wire along the entire length of the face on equipment such as, but not limited to, the Calendar.
Recent events (2)
  • — I (S) $13260
  • — Z (S) $0

1910.147 C04 I

Deleted Repeat Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $72930.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:   a)  Production- Calender Area, Autoskin Plant: On or before July 19, 2019, the employer exposed employees to caught-in hazards in that the employer did not ensure that employees utilized lockout procedures by isolating the energy sources when performing cleaning tasks on the Auto Skin Calendar.  The LG Hausys America, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.147(c)(4)(i), which was contained in OSHA inspection number 1273952, citation number_1_, item number_2_ and was affirmed as a final order on April 23, 2018, with respect to a workplace located at  310 LG Drive SE, Adairsville, Georgia.
Recent events (2)
  • — I (R) $0
  • — Z (R) $72930

More inspections at LG HAUSYS AMERICA, INC.

View LG HAUSYS AMERICA, INC.'s full OSHA safety record →

More inspections in this industry (NAICS 326130)

More inspections in GA

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344167671.