OSHA Inspection: OLIN WINCHESTER, LLC

Issued

2021-12-08 00:00:00

Abate by

2022-07-01 00:00:00

Penalty

Initial $13653.00 · Current $11605.00 Reduced

General-duty citation text

29 CFR  1910.217(c)(2)(i)(a):Point of operation guard(s) on mechanical power press(es) did not prevent entry of hands or fingers into the point of operation by reaching through, over, under or around the guard(s):  On and prior to August 10, 2021, the point of operation barrier guard, on the Ejection Cartridge Capper, full revolution mechanical power press, located in building T-285, did not prevent the entry of hands or fingers into the point of operation by reaching under the interlocked hinged section of the guard.

Issued

2021-12-08 00:00:00

Penalty

Initial $11264.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1910.217(c)(2)(v):The hinged or movable section(s) of interlocked press barrier guard(s) on mechanical power press(es) did not prevent opening of the interlocked section and reaching into the point of operation prior to die closure or prior to the cessation of slide motion:  On and prior to August 10, 2021, the hinged section of the point of operation barrier guard, on the Ejection Cartridge Capper, full revolution mechanical power press, located in building T-285, was not properly interlocked.  The installed interlock device did not prevent opening of the interlocked hinged guard prior to the cessation of the slide motion.

Issued

2021-12-08 00:00:00

Penalty

Initial $11264.00 · Current $9574.00 Reduced

General-duty citation text

29 CFR  1910.217(d)(1)(ii):Hand tool(s) were not used for freeing and removing stuck work or scrap pieces from the die(s) of mechanical power press(es) so that no employee needed to reach into the point of operation for such purposes:  On and prior to August 10, 2021, the employer did not provide, and require the use of, hand tools to remove misfed shells from the dies on the Ejection Cartridge Capper, full revolution mechanical power press, located in building T-285.