1,224,460Inspections Most recent open 2026-07-13 Last loaded 2026-07-16
Safety Incidents OSHA Severe Injury Reports · 2015–2025

OSHA Inspection: JONATHAN Y DESIGNS, INC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of JONATHAN Y DESIGNS, INC in 1200 COUNTY RD 523, FLEMINGTON, NJ 08822 (NAICS 493110). OSHA activity number 345906457.

Watch Jonathan Y Designs, INC — free Get an email when a new federal OSHA severe-injury report for Jonathan Y Designs, INC is published. One employer, no account, unsubscribe in one click.
Site address
1200 COUNTY RD 523
City
FLEMINGTON
State
NJ
ZIP
08822
Mailing
185 MADISON AVE., 6TH FLOOR, NEW YORK, NY 10016
Inspection type
Referral (C)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
493110
Employees
26
Ownership type
A

6 citations on file for this inspection.

1910.37 A03

Serious Gravity 1 1 instance 7 exposed
Issued
Penalty
Initial $4351.00 · Current $2611.00 Reduced
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed:   a. 1200 County Rd 523, Flemington, NJ - Warehouse - Receiving dock   The employer did not ensure exit routes were kept unobstructed.  Employees engaged in the warehousing of retail products placed large metal carts at the exit in a manner that blocked the egress route.    Violation observed on or about April 20, 2022
Recent events (2)
  • — I (S) $2610.6
  • — Z (S) $4351

1910.37 B04

Serious Gravity 5 1 instance 14 exposed
Issued
Abate by
Penalty
Initial $7252.00 · Current $4351.00 Reduced
29 CFR  1910.37(b)(4): Signs were not posted along the exit access indicating the direction of travel to the nearest exit and exit discharge when the direction of travel to the exit or exit discharge was not immediately apparent:  a. 1200 County Rd 523, Flemington, NJ - Warehouse  The employer did not ensure directional signage to the nearest exit was provided.  Employees engaged in warehousing activities worked in areas where the direction of travel to the nearest exit was not immediately apparent, and the direction to the exit was not posted along the egress routes.  Violation observed on or about April 20, 2022
Recent events (2)
  • — I (S) $4351.2
  • — Z (S) $7252

1910.37 B05

Serious Gravity 5 1 instance 7 exposed
Issued
Penalty
Initial $7252.00 · Current $4351.00 Reduced
29 CFR  1910.37(b)(5): Each doorway or passage along an exit access that could be mistaken for an exit was not marked "Not an Exit" or similar designation, or be identified by a sign indicating its actual use (e.g. closet):  a. 1200 County Rd. 523, Flemington, NJ - Warehouse - Carpet Returns  The employer did not ensure doorways that could be mistaken for an exit were not marked as "Not an Exit".  Employees engaged in product return activities in the warehouse, worked in an area where the door marked as an exit was not usable as an exit, and was not marked as "Not an Exit".  Exit doors from the employer's warehouse led into another warehouse and could not be accessed as an exit.  Violation observed on or about April 20, 2022
Recent events (2)
  • — I (S) $4351.2
  • — Z (S) $7252

1910.178 L01 I

Serious Gravity 10 1 instance 8 exposed
Issued
Penalty
Initial $10151.00 · Current $6091.00 Reduced
29 CFR  1910.178(l)(1)(i):The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  a. 1200 County Rd 523, Flemington, NJ - Warehouse  The employer did not ensure that employees were provided effective training in the operation of powered industrial equipment.  Employees engaged in warehousing activities operated equipment that included, but was not limited to Crown, Model PE 3500 Series order pickers and Crown, Model PE 4500 Series electric pallet jacks, that were not provided formal training that included classroom instruction, a written exam, evaluation, and certification to operate the equipment.   Violation occurred on or about April 20, 2022
Recent events (2)
  • — I (S) $6090.6
  • — Z (S) $10151

1910.303 B02

Serious Gravity 5 2 instances 7 exposed
Issued
Penalty
Initial $8702.00 · Current $5221.00 Reduced
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling.  Relocatable Power Taps (RPT), also known as an extension block, power board, power bar, plug board, trailer lead and by many other variations, was not installed in accordance with the manufacturer's listing.   a. 1200 County Rd 523, Flemington, NJ - Warehouse - Carpet Returns  The employer did not ensure that equipment was installed in accordance with the manufacturers listing or labeling.  The employer authorized the installation Relocatable Power Taps (RTP's) to power equipment and plugged additional RTP's (daisy chained) to increase the number of outlets available for additional equipment in a manner that was not approved by the manufacture's listing.  Violation observed on or about April 20, 2022  b. 1200 County Rd 523, Flemington, NJ - Warehouse - Box Returns  The employer did not ensure that equipment was installed in accordance with the manufacturers listing or labeling.  The employer authorized the installation Relocatable Power Taps (RTP's) to power equipment and plugged additional RTP's (daisy chained) to increase the number of outlets available for additional equipment in a manner that was not approved by the manufacture's listing.  Violation observed on or about April 20, 2022
Recent events (2)
  • — I (S) $5221.2
  • — Z (S) $8702

1904.39 A02

Other-than-serious 1 instance 1 exposed
Issued
Penalty
Initial $7252.00 · Current $4351.00 Reduced
29 CFR 1904.39(a)(2): The employer did not report an in-patient hospitalization, amputation, or loss of an eye as a result of a work-related incident to OSHA within twenty-four hours:   a. 1200 County Rd 523, Flemington, NJ - Warehouse  The employer did not report within 24 hours an employee hospitalization. An employee, operating a Crown order picker was injured on April 11, 2022 and the employee did not report the hospitalization until April 18, 2022  Violation occurred on or about April 18, 2022
Recent events (2)
  • — I (O) $4351.2
  • — Z (O) $7252

View JONATHAN Y DESIGNS, INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345906457.