NAICS424910Event Struck by running powered equipment during maintenance, cleaning, testingSource Grain, forage, feed processing and handling machinery n.e.c.
An employee was fixing an issue with seed cleaning equipment when he slipped on the ladder he was on. He went to catch himself and his hand went into a moving belt and pulley on the cleaner. The employee sustained the amputation of his right middle and index fingertips just below the fingernails.
Amputations, avulsions, enucleations unspecified Finger or thumb tip(s), nail(s)HospitalizedAmputation
NAICS112990Event Collision with stationary object, nonroadwaySource All-terrain vehicle (ATV)
An employee was riding an all-terrain vehicle (ATV) to move a bison herd. He was riding up the side of a steep hill when the ATV struck a rock and rolled, ejecting the employee before rolling over him. The employee suffered broken vertebrae in his back that required hospitalization.
Fractures Exterior and musculoskeletal structures of the back unspecifiedHospitalized
NAICS311823Event Struck by running powered equipment during maintenance, cleaning, testingSource Food and beverage processing machinery unspecified
An employee was climbing in the spreader area to remove a pasta jam when his right little finger was cut by the rotary cut-off knife. The employee sustained a laceration and fracture, resulting in an amputation.
Amputations, avulsions, enucleations unspecified Other finger(s) n.e.c.Amputation
NAICS922160Event Parachuting and nonpowered aircraft incidents Source Parachute
A smoke jumper parachuted out of a helicopter during a forest fire response, landed on steep rugged terrain, and suffered femur and rib fractures and a liver laceration. The employee was hospitalized.
Multiple severe wounds and internal injuries Trunk and other lower extremitiesHospitalized
NAICS115310Event Thrown, fell, or jumped from animal transportationSource Horses, equines
An employee was riding a horse and leading several pack mules along a trail. A few mules started acting up, causing the horse to stir. The employee then fell off the horse and landed on a stiff woody protrusion that impacted her chest/rib area. The employee was hospitalized with a fractured rib and a punctured lung.
An employee was working on a tree thinning unit and was cutting a 6" diameter tree. During the back-cut when the chainsaw kicked back. The saw struck her, resulting in a 3-inch laceration on her left leg below the knee. She was hospitalized and required surgery.
Cuts, lacerations, punctures without injury to internal structures Lower leg(s)Hospitalized
NAICS332312Event Injured by object handled by person unspecifiedSource Structural elements n.e.c.
An employee was moving a steel frame by hand when his right middle finger was pinched between the frame and a steel saw horse. The employee sustained a crushing injury to the finger and the removal of skin that required surgery and hospitalization.
Avulsions, enucleations without bone loss Other finger(s) n.e.c.Hospitalized
NAICS721110Event Pedal cycle collision in nonroadway areaSource Bicycle, pedal cycle
An employee was coaching a bike lesson. Their handlebar clipped a tree, rotated, and struck their left side. This caused the employee to fall, and they were hospitalized with a ruptured spleen.
Closed trauma involving internal organs, major blood vessels Other digestive structures n.e.c.Hospitalized
NAICS441320Event Explosion of pressure vessel, piping, or tireSource Tires, inner tubes
An agricultural tire failed and struck an employee's face and left hand. The employee suffered a cut above the left eye and multiple fractures in the hand and was hospitalized for surgery.
NAICS237310Event Contact with hot objects or substancesSource Chemicals and hazardous materials unspecified
An employee was transferring hot oil from one containment tank to another. The employee removed a dust cap when hot oil came out the top and splashed on the employee, resulting in multiple third-degree burns to their neck, arms, and other parts of the body.
Thermal burns third degree or higher Multiple body parts n.e.c.Hospitalized
NAICS424510Event Other fall to lower level 6 to 30 feetSource Heavy rail vehicles unspecified
Employees were loading a set of grain hoppers. A lid blew shut on the next car to be loaded. While flipping the hopper lid back open, an employee fell from the top of the rail car to the ground 14 feet below. He suffered two compound fractures to one leg and a fracture to the other leg/ankle.
Fractures Ankle(s) and leg(s) unspecifiedHospitalized
NAICS115310Event Parachuting and nonpowered aircraft incidents Source Parachute
An employee was performing a proficiency jump during smokejumper training. Increasing wind and turbulent air caused the employee to have a hard landing; the employee suffered a fractured femur, a fractured right foot, and compression fractures to two lower-back vertebrae. The employee was hospitalized.
Fractures Trunk and other lower extremitiesHospitalized
NAICS441310Event Struck by running powered equipment n.e.c.Source Forklift, order picker, platform truck powered
Two employees were putting a broken pallet jack into a metal recycling bin using a dock stocker. The jack became stuck on a pallet of totes next to the bin, causing the jack handle to snap back. It pinched the injured employee's fingers against the bin, resulting in an amputation to the ring fingertip.
Amputations, avulsions, enucleations unspecified Finger or thumb tip(s), nail(s)Amputation
NAICS811111Event Fall on same level resulting in exposure or contact Source Ground, travel, and support surfaces unspecified
An employee was opening a tailgate on a customer's truck when it unlatched and he fell to the ground. He struck his neck on the truck's trailer ball hitch as he fell, resulting in dizziness, nausea, and discomfort. The employee was hospitalized with a neck contusion.
Bruises, contusions Exterior and musculoskeletal structures of the neckHospitalized
NAICS561730Event Nonroadway noncollision fall or jump from and struck by moving vehicleSource Lawn mower riding
An employee was standing on a standup mower and reversing it when the mower spun around. The employee jumped off the mower and it struck and ran over his right foot, amputating his third, fourth, and fifth toes.
Amputations involving bone loss Toes(s), toenail(s)Amputation
NAICS321113Event Struck by running powered equipment during maintenance, cleaning, testingSource Lathes
During a maintenance day, two operators locked out the lathe to replace the trash gate cylinder. To complete the lockout, the lathe operator raised the trash gate to the pin position while another operator inserted a pin for the gate to rest on while the work is performed. When this event occurred, the lathe operator was in the cab, and the other operator was at the trash gate with the blocking pin. While inserting the pin, the gate rose from the run position to the pin position, pinching the injured employee's left middle finger and resulting in a fingertip amputation.
Amputations, avulsions, enucleations unspecified Finger or thumb tip(s), nail(s)Amputation
NAICS327390Event Struck by other falling object n.e.c.Source Structural elements n.e.c.
An employee was forming a light pole foundation when a cable anchor failed, causing the concrete form to fall and pin the employee between the form and the wall. The employee was hospitalized with a fractured pelvis.
NAICS325311Event Fall on same level due to slip or tripSource Ground, travel, and support surfaces unspecified
An employee was on the ground unloading fertilizer when he tripped and fell over a cinder block that was on the ground. The employee was hospitalized with a fractured left hip.
NAICS213112Event Struck by dislodged or detached object(s)Source Drilling and extraction machinery unspecified
An employee was on the rig floor pulling rod. A bolt sheered off the strong arm which came down and struck the employee in the chest. The employee was hospitalized for a fractured sternum and internal injuries to the spleen and colon.
Multiple severe wounds and internal injuries Multiple trunk locationsHospitalized
NAICS213112Event Struck by running powered equipment during maintenance, cleaning, testingSource Drilling and extraction machinery unspecified
An employee was under the rig floor adjusting a chain on the slips when his finger became caught between the chain and the blowout preventer (BOP). The employee sustained the amputation of his finger.
Amputations involving bone loss Other finger(s) n.e.c.Amputation
NAICS424410Event Struck by running powered equipment n.e.c.Source Butchering machinery
An employee was cutting pork with a band saw when his left hand was caught by the saw and the index and middle fingers were amputated. A guard was in place at the time.
Amputations involving bone loss Other finger(s) n.e.c.Amputation
NAICS236115Event Struck by object dropped by personSource Dimensional lumber
An employee was cutting a 2x4 to build a safety rail when he dropped an 8-inch section. The wood fell about 5 feet and struck the injured employee's face. The injured employee required surgery on his eye.
Traumatic injuries or exposures unspecified Eye(s)Hospitalized
A large laser table weighing 1500 lbs. was being moved into a storage unit for customer. Wood decking was placed on the floor of the storage unit so the table was not sitting directly on the concrete floor. As the laser table was set down, one employee's left index finger was caught between the bottom of the table and the decking, resulting in amputation below the first knuckle.
Amputations involving bone loss Other finger(s) n.e.c.HospitalizedAmputation