Gilford, NH

Employers with the most severe injuries in Gilford

Example incidents

• Richard Porter Asphalt Paving, Inc. GILFORD, NEW HAMPSHIRE · 2024-07-18 · Pedestrian struck by vehicle or object propelled by another vehicle in road work zone

  An employee was working on the front watering system of a roller; the employee and the equipment were off the roadway. An oncoming vehicle struck the parked truck, trailer, and roller. The employee was then struck by the equipment, resulting in a fractured pelvis and sacrum.

• Twin Oaks Construction GILFORD, NEW HAMPSHIRE · 2022-02-11 · Other fall to lower level 11 to 15 feet

  An employee was on a ladder inside a house attaching strapping to the exterior door frame. The employee stepped on a guard rail and the rail came loose causing the employee to fall 11 feet from the ladder out of the opening and land in a frozen snow bank. The employee struck his head on the frozen ground and suffered head trauma and fractured vertebrae.

• Wood & Clay, Inc. GILFORD, NEW HAMPSHIRE · 2022-01-28 · Caught in running equipment or machinery, n.e.c.

  An employee was setting up the wood shaper to cut raised panels for a custom, built-in project. The employee, as part of the set-up process, was running scrap wood through the shaper after every adjustment to check the depth of cut. The employee pushed a piece of scrap wood through the shaper after an adjustment to the cutter head. When the employee's hand was above the cutting head, the cutting head was bound on the wood and pulled it down, rolling it into the cutting head. The cutting head then came through the upper surface of the wood and amputated the employee's left ring finger to just below the first knuckle, the left middle finger to the first knuckle, and the left index finger to just below the nail bed. The cutting head was not guarded at the time.

• Walmart Stores, Inc. GILFORD, NEW HAMPSHIRE · 2018-12-11 · Fall through surface or existing opening, unspecified

  An employee fell through an opening between a loading dock's plate and the wall, suffering an internal injury. The employee was hospitalized.

• Howard Precision, Inc. GILFORD, NEW HAMPSHIRE · 2018-08-09 · Caught in running equipment or machinery during regular operation

  An employee was polishing a part on a lathe with sandpaper when the glove she was wearing was caught on the part and pulled her left arm into the lathe, resulting in a left arm amputation at the elbow.

• Howard Precision, Inc. GILFORD, NEW HAMPSHIRE · 2015-01-09 · Struck against moving part of machinery or equipment

  An employee amputated a finger tip while using a band saw.

Browse every record via full-text search →
Back to all New Hampshire OSHA records →
Source: federal OSHA Severe Injury Reports, inspections, and ITA Form 300/301 filings. Counts reflect federal jurisdiction only.