E-J Electric Installation Co

An employee was offloading portable power distribution unit (PDU) equipment from a delivery truck. The PDU was being lowered on the box truck's tailgate lift when one of the PDU's wheels rolled forward. The unit fell to the ground, toppled over, and struck the employee. The employee was hospitalized with injuries to the right side of their body including their shoulder and hip, and injuries to their left elbow. The employee's hip was fractured.

An employee was setting up stage equipment when they were struck from behind by a mobile cart, resulting in a fracture to their lower right leg.

An employee was installing street lamps from an aerial lift bucket when a car struck the aerial lift's control panel. His right hand was then crushed between the bucket and structural steel, requiring hospitalization.

An additional 480V service for a step-up transformer was being installed. When the circuit was tested, an arc flash occurred, resulting in lacerations to the employee's hand.

An employee had been assisting a customer when they were struck by a grocery cart and required hip surgery.

During rigging operations, a steel beam rolled onto an employee's lower left leg. The employee suffered a broken tibia and fibula.

On December 4, 2023, at 12:30 PM, an employee was grinding a pipe. The stops on the skid failed and a pipe rolled backward onto the employee. The employee was hospitalized with bruising and contusions of the right leg.

An employee was connecting two dollies together when his left middle finger was crushed by a dolly, resulting in a partial amputation.

An employee was loading mail into a delivery vehicle and when their little finger was caught between a mail hamper and the metal door of the vehicle, resulting in partial amputation of the finger.

An employee was terminating cables in a junction box. A loose ground wire came into contact with the bushing, causing a flash that burned the right side of the employee's face and his right hand.

An employee was using a bucket truck hoist to raise secondary aerial wiring. The wire made contact with the primary wire, causing an arc flash. The employee suffered burns to both hands and was hospitalized.

An employee was working to move a telephone pole when the pole rolled, causing injury to their hip.

An employee was terminating conductors to buss bars inside the secondary compartment of a single-phase transformer. An arc flash occurred, causing burns to the soft tissue of the employee's face.

An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.