SKF USA Incorporated

An employee was loading the rings into the furnace. The employee was steadying the load with one hand and operating the hoist with the other hand when the lifting device pinched the end of their left middle finger resulting in amputation of one-half inch.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee was maneuvering a 500-pound spin plate from a lower rack. While the plate was being rolled, it went out of control, injured the employee's left bicep, and then rolled over his left foot resulting in a crushing injury to the foot as well as contusions to the torso and left leg. The employee was hospitalized.

An employee was watching a machine run when he became caught in the machine. The employee sustained a severe laceration to the left forearm that partially lacerated a tendon.

An employee was setting up the CNC lathe machine. The employee was adding the tailstock onto the machine when it moved and crushed his right little finger.

An employee was repairing a conveyor hang-up on a machine and pulled up on the belt between the main conveyor drive pulley and the gearbox pulley. When the conveyor hang-up released, the employee's foot slipped, causing their hand to move forward and get pulled into the machine. The employee suffered an amputation to the right ring finger at the first knuckle. The machine was locked out at the time.

On January 9, 2023, at 9:30 p.m., an employee was repairing a robotic machine that had been dropping parts. After making initial repairs, the operator cycled the machine but the problem was still not corrected. The machine operator left the area and upon returning, the injured employee was found pinned by the robot between the grabbing arms and the area where the robot places the parts. The employee suffered a lacerated spleen, lacerated pancreas, a hole in the stomach, a hole in the aorta, and other injuries to the chest and abdomen.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.