Scheerer Bearing Corporation

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee's left arm was caught in the fingers or jaws of the head stretcher machine, resulting in a laceration. The employee was hospitalized.

Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

An employee was maneuvering a 500-pound spin plate from a lower rack. While the plate was being rolled, it went out of control, injured the employee's left bicep, and then rolled over his left foot resulting in a crushing injury to the foot as well as contusions to the torso and left leg. The employee was hospitalized.

An employee was setting up the CNC lathe machine. The employee was adding the tailstock onto the machine when it moved and crushed his right little finger.

An employee was repairing a conveyor hang-up on a machine and pulled up on the belt between the main conveyor drive pulley and the gearbox pulley. When the conveyor hang-up released, the employee's foot slipped, causing their hand to move forward and get pulled into the machine. The employee suffered an amputation to the right ring finger at the first knuckle. The machine was locked out at the time.

On January 9, 2023, at 9:30 p.m., an employee was repairing a robotic machine that had been dropping parts. After making initial repairs, the operator cycled the machine but the problem was still not corrected. The machine operator left the area and upon returning, the injured employee was found pinned by the robot between the grabbing arms and the area where the robot places the parts. The employee suffered a lacerated spleen, lacerated pancreas, a hole in the stomach, a hole in the aorta, and other injuries to the chest and abdomen.

On May 2, 2022, an employee was aligning a fixture on the rotating work table of a vertical turret lathe when his wrench slipped and his hand contacted a steel cable. The employee sustained a partial amputation to a finger.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.