Three Phase Line Construction, Inc.

An employee was removing a jumper from the center phase of a de-energized transmission line. When the jumper was removed, the induction current on the line (induced by nearby energized transmission lines) entered the employee's left hand and exited through his left hip area. The employee was hospitalized with burn wounds to left hand and lower right abdomen, as well as a compression fracture to his T5, T6, and T7 vertebrae.

At 4:00 p.m. on July 3, 2023, a severe thunderstorm passed over a job site. An employee was taking shelter under a carport where batteries were stored. The carport was destroyed; flying objects struck the employee, who suffered a jaw injury and a knee injury.

An employee was struck in the head by a hockey puck while exiting the locker room. The employee sustained a laceration above their left eye.

An employee was clearing a clogged sugar chute, containing rare earth magnets inset into an aluminum bar to catch any metal in the sugar. The employee loosened the middle of three magnets and it was attracted to the outside magnet, crushing the tip of his right middle finger. The fingertip was amputated.

An employee was working in the pallet repair line when a pneumatic nail gun shot a nail into their right wrist. The employee was hospitalized and required surgery to remove the nail.

An employee was emptying a plastic bucket of soils around a newly planted tree using a hay hook to assist. The hay hook suddenly broke free of the plastic bucket and struck the employee in the right eye, resulting in blunt-force trauma injuries to their eye.

An employee was terminating cables in a junction box. A loose ground wire came into contact with the bushing, causing a flash that burned the right side of the employee's face and his right hand.

An employee was using a bucket truck hoist to raise secondary aerial wiring. The wire made contact with the primary wire, causing an arc flash. The employee suffered burns to both hands and was hospitalized.

An employee was working to move a telephone pole when the pole rolled, causing injury to their hip.

An employee was terminating conductors to buss bars inside the secondary compartment of a single-phase transformer. An arc flash occurred, causing burns to the soft tissue of the employee's face.

An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.

An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.

An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.

An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.