H5 Data Centers

An employee was operating a band saw when his right little fingertip was amputated.

An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.

An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.

An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.

An employee was using a shaper to cut wood when their right hand contacted the blade, resulting in a partial amputation to the right ring finger.

Two employees were working by a switch gear. Upon opening the switchgear, employee 1 noticed some loose bolts. As employee 1 looked back, employee 2 reached into the switchgear and an arc flash occurred. They were both severely burned. Safety gear was worn at the time.

An employee was walking on a concrete storm water drain canal when they tripped on the unlevel concrete surface and fell, breaking their left ankle. The employee was hospitalized for surgery.

Employees were inspecting a broken telephone pole to remove it and attached the cable from the roadway. They removed the broken pole from the cable/strand so they could raise the cable/strand up and attach to a tree to gain clearance until it could be repaired. The injured employee cut the top (above the cable/strand) of the pole off and it fell to the ground in the roadway. They then moved that piece out of the roadway. This left a 6-foot piece still attached to the strand (below the strand) at about a 45-degree angle to the ground. When the remaining 6-foot piece was cut from the cable/strand, it broke and swung toward the injured employee, knocking him to the ground. The employee sustained a fractured skull and a fractured L5 vertebra.

An employee was manually moving a dolly (loaded with 7 sheets of drywall) out of a workspace when the dolly tipped over and landed on his right ankle. The employee was hospitalized with a fractured ankle and required surgery.

An employee was on a 28-foot extension ladder troubleshooting equipment at a residential property. While on the ladder, the strand cable supporting the extension ladder failed, causing the ladder and the employee to fall the ground and into the roadway. The employee sustained facial injuries and a dislocated left elbow.

An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.

An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.

An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.

A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.

An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.