Compressed or pinched between two stationary objects · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury
at Eagle Manufacturing Company, 12th & Main Street, WELLSBURG, WEST VIRGINIA 26070
on — Cuts, lacerations, affecting the ankle(s).
Final narrative
On January 26, 2015, an employee was hospitalized after receiving a deep laceration and possible fracture to the right ankle. Employee slipped while pushing a metal safety cabinet down a roller conveyor line. The employee's foot was lodged between the conveyor and a turn table stretch wrapper.
HospitalizedAnkle(s)Conveyors-roller
More severe injuries at Eagle Manufacturing Company
On February 5, 2016, at approximately 12:30pm, an employee was injured while operating a full revolution mechanical power press. The employee was transferring can parts into a redraw die. Two fingers on his right hand became trapped between the can part and the working die as he removed the can part from the machine, resulting in a partial amputation of the middle and ring fingers.
An employee was sweeping behind a guardrail and stepped on the lower portion of the guardrail when he lost his balance. As he stepped back, his foot became stuck between the guardrail and a transformer, resulting in a compound fracture of left tibia and fibula.
An employee was repositioning a chill adder so that the pig tubs behind it could be removed. The employee lost their balance and their finger was pinched between the chill adder and the pig tub, resulting in a fingertip amputation.
An employee was backing up a stand-up forklift. The vehicle struck a guard and a wooden table. Upon exiting the forklift, the employee's left leg became caught between the table and dock guard, causing a fractured leg.
An employee was working on a shoring scaffold with another employee to strip plywood from cement. The employees threw a 4x4 piece of forming down and it got stuck on the beam of the scaffold. The injured employee went to grab the forming when their left ring fingertip was pinched between it and the beam, resulting in a partial amputation.
An employee was using a torch to trim the foundation for a compressed air tank so the tank would fit in place. His left hand was caught between the tank and the steel bar foundation structure; the hand was crushed and burned.
More severe injuries in this industry (NAICS 332431)
An employee was clearing a jam on a ring press. The press's secondary switch was activated, engaging it. It caught the employee's hand. The employee was hospitalized and sustained the amputation of two fingers. The machine was unguarded at the time of the incident.
An employee was checking a conveyor belt chain when his right index finger came into contact with the moving chain. He suffered a partial amputation to the right index finger.
An employee was conducting routine maintenance on a mixer. New lid pins had been installed, and the employee was rotating by hand to ensure they had been installed correctly. The employee's left middle finger was caught between the lid and top of a pin. The momentum from the mixer continued, causing a crushing injury to the finger. The employee underwent a medical amputation from the top knuckle to the tip of the finger.
An employee was climbing down a 15-foot multipurpose ladder. The employee fell about 8 feet, landing on the concrete floor and the ladder itself. The employee suffered several injuries, all on the right side: broken ribs, a broken sternum, a broken temporal bone, broken shoulder, multiple fractures to the cheekbone, and a brain bleed.
An employee was rolling up the landing gear on his trailer when the handle began to unwind and struck his face, fracturing his jaw. The employee was hospitalized and required surgery.