Federal OSHA recorded a severe workplace injury
at Marmen Energy, Inc., 1820 North Plum Avenue, BRANDON, SOUTH DAKOTA 57005
on — Fractures, affecting the foot(feet) and leg(s), unspecified.
Final narrative
The employee was attempting to rework the alignment on a seam in a rolled metal cylinder when the spot welds broke. The metal struck the employee, resulting in a fractured left leg and numerous fractures to both feet.
HospitalizedFoot(feet) and leg(s), unspecifiedMetal materials-nonstructural, unspecified
An employee was using a portable angle grinder and a sanding disc to remove weld spatter from a 3-11 shell weighing approximately 11,900 pounds. The employee was checking the alignment of the shell with its flange when their gloved, left hand was caught between the shell and the poly wheel of the roller upon which the shell was sitting/rotating. The employee's left thumb, ring and pinky fingers suffered lacerations that required sutures. His index and middle fingertips were fractured requiring pins.
An employee used his hand and arm to try to stop a swinging piece of equipment he was moving with an overhead crane. The equipment struck the employee's arm against a guard rail, resulting in a fracture.
An employee was inspecting a bridge repair project. A gas-powered, walk-behind pavement saw, being used 12 feet away from the employee lunged forward, cutting his left foot. The employee's fourth toe was amputated and he was hospitalized.
An employee had been reviewing an insulated glass unit. The employee was placing the glass unit back in its box when it slipped out of the box and a chipped corner lacerated the employee's left hand.
An employee was on a truck while using a clamp to secure a quartz slab to an A-frame on the truck. A gust of wind pushed the slab onto the employee, resulting in a dislocated right shoulder and wrist.
An employee was shearing off two inches of metal when the metal kicked up and struck his hand. The employee's left ring and middle fingertips were amputated.
An employee was working on a 35,000-pound I.D. fan. As the employee rotated the blades with his foot, the blades continued to spin, lacerating his right foot and amputating a toe.
More severe injuries in this industry (NAICS 332313)
A steel tube fell from a straddle truck onto an employee's foot, causing the steel toe of the employee's shoe to press into the employee's left foot. The employee sustained fractured phalanges and was hospitalized.
An employee was unloading materials from the back of a flatbed trailer. The employee fell off the back of the trailer approximately 4 feet to the ground below, resulting in a fractured left collarbone and fractured ribs. The employee was hospitalized.
An employee was bending material in a mechanical brake press when the press rotated and caught his right hand. His finger was crushed between the die and a steel plate, resulting in amputation of the finger.
An employee was cleaning pans containing adhesive by pouring acetone into the pans. After soaking, the employee used a plastic spatula to scrape the paint from the pan. During scraping, a fire spontaneously started underneath the employee near the pan. The employee threw the container of acetone out of the way to avoid it catching on fire, and spilled acetone onto his clothing, causing the fire to spread. The employee suffered burns to both hands and the right calf.
The injured employee was assisting a co-worker to transfer a V-baffle (large piece of angle iron weighing 736 lbs.) into a vessel shell. The injured employee stepped off the end of the vessel and fell backward. The employee sustained a dislocated left shoulder, a fractured left wrist, a fractured lower right leg, and a laceration to the left eyebrow.
An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.
An employee was walking past a crossover conveyor when a ramp came down and hit them in the back. The employee sustained a broken back vertebra, as well as a concussion, and was hospitalized.
An employee was using a hook tool to pull a pallet onto the lift gate of a tractor trailer. The hook detached from the underside of the pallet, causing the employee to fall backward off the lift gate. The employee landed on the concrete parking lot about 5 feet below, suffering fractures to the skull and two thoracic vertebrae.
An employee was walking on a truss table when he lost his balance and fell approximately 3 feet to the floor. The employee sustained a dislocated and fractured left ankle.