Omega Plastics Corporation

An employee was adjusting a piece of cardboard behind the draw rolls on a bag machine. The rolls caught and crushed the employee's right index finger. He was hospitalized and the finger was medically amputated.

An employee was taping empty tubes on a bar when the bar started to rotate grabbing the tape and the employee's left arm. The employee suffered a broken left wrist.

An employee was cleaning the rubber plates on the printing press and crushed three fingers between the printing cylinders. The machine was running at the time and was not locked out.

An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.

An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.

An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.

An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.

An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.

An employee was removing a bolt from a caliber on a machine with one foot on the platform and the other foot on the piece of equipment. As he went to loosen the bolt, he lost his balance and fell four feet to the ground.

An employee was jogging a loose belt on a machine. The machine's sprocket and belt caught the employee's right hand and lacerated the top of it. The employee was hospitalized.

A pallet had been loaded onto a trolley to be picked up for wrapping, but a broken bottom board on the pallet was blocking an entry roller sensor, tripping it and preventing the trolley from moving. An employee removed the board and the trolley began to travel. Her left knee and thigh were lodged between the framing of the trolley and a stationary pallet insert line. She suffered a laceration to the back of the thigh.

An employee put a roll of lamination film on a lamination machine to laminate (glue) two pieces of film together. When he pushed the button to disengage a roll from the machine, the empty roll moved over and his right middle finger was caught between the metal rod and the core of the laminate roll. The fingertip was amputated.

An employee was traveling forward in a forklift when it struck a support beam. The employee sustained a fractured femur.

An employee tripped over a stool and fell on the floor, resulting in a left displaced mid-cervical femoral neck fracture.

An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

An employee was inspecting a breaker box and turning on/off a circuit breaker when he was electrocuted.

An employee was walking on the sidewalk. When they stepped off the curb, they fell to the ground, resulting in fractures to their tibia, fibula, and a metatarsal.