Millard Lumber, Inc

An employee was operating a high-speed, automated robotic component saw. After running a series of parts through the saw, the employee rested his right hand on the lumber feed conveyor, which pinched his right index finger, resulting in a fingertip amputation.

An employee was working on a truss press machine. It closed while the employee's left hand was still in it, and the tip of the employee's left thumb was amputated.

On October 26, 2023, an employee was riding on the forks of a forklift that was moving a stack of glass panels. The forklift made a turn and the glass fell on the injured employee, causing lacerations and crush injuries to their hands.

An employee was on a tractor and moving a stack of lumber when a board shot out from the stack and struck the employee's right leg. Their tibia was fractured and required surgery.

An employee was using a powered industrial vehicle (PIV) equipped with specialized horizontal clamps to move multiple heavy paper rolls. The top roll came loose from the clamps, falling towards the cab of the lift and lacerating the employee's middle and ring fingers.

An employee was helping a forklift operator move a steel joist. The joist struck a forklift tire, and as the forklift started to move, the joist shifted and struck the employee's right leg, resulting in a fracture.

An employee was using a pallet jack to move product from a truck to a customer location. A box on the top of the pallet shifted while the pallet was going over the bump of a dock plate and fell on the employee s head. Afterward, the employee experienced numbness in their limbs.

An employee was walking down the off ramp from a box truck, carrying a door for delivery. A strong wind caught the door, causing the employee to lose balance and fall about 2 to 3 feet to the ground. He landed on his back and suffered a broken vertebra.

An employee was loading lumber from a rack into his truck by hand. He fell from the truck to the ground and sustained a fractured hip.

An employee was delivering lumber to a customer's job site. He was using a truck-mounted forklift to transport the material to the staging area. The surface of the path of travel changed from asphalt to soil and rock with a slight downward grade. When the forklift moved onto the softer surface, it sank into the ground and its center of gravity shifted forward, causing it to tip over. The employee's right arm sustained a closed, supracondylar humerus fracture.

An employee was helping two forklift operators move and inventory flat sheet metal that was staged on racks. The metal fell off one side and struck the employee's arms and abdomen. The employee sustained a laceration above the left eye, a left forearm injury, and a ruptured spleen. The employee was hospitalized and required surgery.

An employee was cleaning a press machine when their right ring finger became caught in the press, resulting in the amputation of the finger.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.

An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.

Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.

An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.