Other fall to lower level 11 to 15 feet · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury
at UTLX Manufacturing, LLC, 4338 Highway 73, GEISMAR, LOUISIANA 70734
on — Cuts, lacerations, affecting the forehead.
Final narrative
Worker was sitting on top of a railroad tank car changing a threaded valve. He slipped and fell approximately 11 feet to the ground below striking his shoulder and lacerating his forhead requiring three stitches and five staples to close.
An employee was painting a tank car when his left hand came in contact with the spray from the paint sprayer, puncturing his left index finger. He was hospitalized and required surgery.
An employee was installing a brake part on a refurbished rail car. The employee fell from a 4-foot ladder to the cement floor, suffering head injuries and losing consciousness. He was hospitalized.
An employee fell from a ladder while climbing down, landing on the ground 6-7 feet below. He suffered a broken right ankle and a fractured left humerus.
An employee was assembling truck wheels for tank cars. When he cut the banding straps from side frame parts, the side frames fell on and struck his leg below the knee, fracturing his shin. He was hospitalized.
The employee was on top of a rail car to level the grain that was deposited into the car when they fell 13-15 feet to the ground. The employee sustained a right leg fracture.
An employee was on an extension ladder installing a satellite dish on a roof when they fell approximately 12-15 feet to the ground. The employee sustained fractures.
An employee was setting a 5-foot pry bar into a precast concrete slab and stood on the end of the pry bar to move the slab into place. The pry bar slipped out causing the employee to fall backward 15.5 feet to the dirt ground. The employee was hospitalized with a broken leg.
An employee was on a step ladder to measure and mark a crane rail for modification. The employee fell approximately 12 to 15 feet to the ground, resulting in a fractured right hip.
An employee was on a trailer securing a load of logs when they fell approximately 9-12 feet to the ground. The employee sustained brain hemorrhaging and lacerations to the thigh and above the eye. The employee was hospitalized.
More severe injuries in this industry (NAICS 336510)
An employee was responding to a service request for a cable stripping machine that was making noise and not functioning consistently. While testing its function, the machine contacted the employee s right index fingertip, resulting in a fingertip amputation to the tuft.
An employee was using a handheld cordless electric torque wrench. The tool's reaction arm came into contact with the employee's left hand, causing an amputation to the middle finger above the first knuckle.
On August 6, 2025, an employee was preparing to weld a metal sheet that goes between containers and weighs 800 pounds. The employee was placing a two-foot wooden brace (4 by 4) under the metal, which was being raised by a crane operator using a magnet. The magnet shifted and caused the load to catch the employee's right index fingertip against the wooden brace, resulting in a fingertip amputation.
An employee was climbing up a ladder to the top of a railcar. The employee slipped and fell from the ladder, striking the coupler of the railcar during the fall. This caused the employee's body to shift, and they landed on their head/nose/face. The employee suffered broken ribs, a broken cheekbone, a broken nose, and internal bleeding.
A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.
A security employee was responding to an urgent call from staff regarding a violent patient. The employee tripped and fell on the floor outside of the stairwell. The employee sustained a closed head injury, contusion of the cerebrum without loss of consciousness, and a closed fracture of the distal end of the right radius.
A temporary employee was testing an electrical starter motor. He was placing tape on the starter while the breaker was not engaged, but the starter sent an arc flash that burned his hands and stomach.
An employee was walking on a sidewalk and stubbed his toe on an elevated portion of concrete, causing him to trip and fall. The employee's right knee was dislocated.