Caught in running equipment or machinery during regular operation · Soreness, pain, hurt-nonspecified injury
At a glance
Federal OSHA recorded a severe workplace injury
at GREIF INC, 9420 WARMINGTON ST. S.W., MASSILLON, OHIO 44646
on — Soreness, pain, hurt-nonspecified injury, affecting the hand(s) and arm(s), unspecified.
Final narrative
On or about 4/1/2015, at approximately 7:00 p.m., an employee bypassed an interlock device by climbing over a guarding fence and reached into the cushion roller portion of a material handling system. The machinery was not de-energized at the time. The rollers caught/struck the employee's right hand and arm. The employee was hospitalized.
HospitalizedHand(s) and arm(s), unspecifiedPaper production machinery, unspecified
An employee was troubleshooting the crimper action of a machine that made press paperboard cylindrical containers. As he passed a photo eye in an interlock gate area, the machine cycled and the indexing arm struck him on the head/face, crushing him against the chuck. He suffered a broken jaw, loss of teeth, and injuries to the back of the neck and head.
The operator entered information into the data screen of the line winder, then turned around and walked to the paper rolling machine on the line. He tripped on the edge of a presence sensing safety mat and fell into the machine. The employee's left arm struck a bar and his right hand landed on an in-running nip point of the vertical roller, horizontal feed belt, and the housing of the vertical belt. Three fingers on the operator's right hand were degloved.
An employee was trying to remove a tool from a machine when his right thumb was caught in the sprocket of the shaft of the machine resulting in an amputation. The machine was not locked out at the time.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 322121)
Tools and parts were being lowered to the ground from an elevated platform in a 5-gallon bucket. The rope being used to lower the bucket failed; the tools and parts fell and lacerated the left forearm and upper left leg of an employee on the ground.
An employee was tracking an infeed belt on a scrap hogger when their right arm was caught between the belt and a roller. The arm was broken and the employee's shoulder was dislocated. The employee was hospitalized.
An employee was working to clear a jam from a paper napkin folder. The ram that advanced the napkins pushed the employee's right arm into the side of the machine, causing several lacerations and a hairline fracture.
An employee was troubleshooting overflowing ink on a printer-slotter machine when their right ring fingertip was caught in a guarded roller, resulting in a partial amputation.
An employee was disconnecting wires in preparation to swap out a refiner motor when they contacted energized equipment and sustained an electrical shock. The employee was hospitalized.
An employee was working to deliver mail to an apartment building. She was waiting for a customer to move, to obtain clearance to the mailboxes. The door swung inward and closed on her right little finger. The top half of her finger was surgically amputated.
An employee fell from a step ladder while reaching for a tie-off point. He impacted the ground, and landed on his bolt bag which contained tools. The employee was hospitalized with fractured ribs, and a lacerated spleen and kidney.
On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.
An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.
An employee was setting up communication equipment for a meeting. They were walking and tripped over a speaker on the ground. The employee sustained a leg injury.