Struck against moving part of machinery or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Builders FirstSource - Florida, LLC, 1602 Industrial Park Dr., PLANT CITY, FLORIDA 33566
on — Amputations, affecting the fingertip(s).
Final narrative
On 04/07/2015 at 6:30 p.m., an employee feeding wood into the web saw had his right index fingertip amputated 1.5 inches.
On November 10, 2021, an employee was using a chop saw to cut an overhanging stop attached to a door jamb. When the blade hit the jamb, the blade kicked back and his left hand was pulled into it. His left thumb and middle finger were lacerated and his left index finger was amputated below the first knuckle.
An employee was attempting to push a roof truss into a larger roller press with his right foot when his shoe laces or pant leg became caught on the truss. The truss then pulled his foot/leg into the roller press, resulting in the amputation of his right foot.
An employee was on the interior of a building and leaning out the window to weather proof the flange when the employee slipped and fell 14 feet to the ground. The employee punctured a lung and broke the upper left arm, clavicle, upper chest bone, six left-side ribs, and lower back.
An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.
An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.
An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.
An employee was spreading out wood on the live feed table. As he was operating the automatic feed saw, and the wood went in crooked and he went to straighten it. His left middle fingertip was crushed between the wood and the computer monitor. The employee's fingertip was amputated without loss of bone.
An employee was working on a conveyor belt in the chipper room that was not functioning. While inspecting the uncovered gearbox, the conveyor system started. The employee sustained an amputation to their right little finger. The conveyor system was not locked out at the time.
An employee was walking on a truss table when he lost his balance and fell approximately 3 feet to the floor. The employee sustained a dislocated and fractured left ankle.
An employee was placing trusses on conveyor rollers to be stacked. The rollers could not roll the trusses, so the employee pulled the trusses onto the rollers. One of the spinning rollers caught their hand, resulting in three fingertip amputations.
An employee reached down to pick up a box next to a roller conveyor. His gloved left hand was caught in the chain and pulled into the sprocket. Three fingers were injured: the middle and index fingers were cut to the bone, and the ring finger was amputated at the nail.
An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.
An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.
An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.
An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.