PUEBLO, COLORADO—
EVRAZ ROCKY MOUNTAIN STEEL
Fall through surface or existing opening 6 to 10 feet · Traumatic injuries and disorders, unspecified
At a glance
Federal OSHA recorded a severe workplace injury at EVRAZ ROCKY MOUNTAIN STEEL, 2100 S. FREEWAY, PUEBLO, COLORADO 81004 on — Traumatic injuries and disorders, unspecified, affecting the nonclassifiable.
Final narrative
An employee was moving a pallet when a swing gate opened causing him to lose balance and fall through the opening approximately 8-9 feet to the ground.
More severe injuries at EVRAZ ROCKY MOUNTAIN STEEL
PUEBLO, COLORADO—
EVRAZ ROCKY MOUNTAIN STEEL
An employee was caught between the met hood and a column in the ladle refining furnace area. The employee was hospitalized for broken ribs and vertebrae and a punctured colon.
PUEBLO, COLORADO—
EVRAZ ROCKY MOUNTAIN STEEL
An employee was cleaning parts in a solvent tank when solvent spilled on the employee's clothing. The employee walked by a furnace and the solvent on their clothing caught on fire resulting in burns to the entire lower half of his body.
View EVRAZ ROCKY MOUNTAIN STEEL's full OSHA safety record →
Similar incidents · Same event type
ATHOL, IDAHO—
MANDERE CONSTRUCTION INC
An employee was laying out a 2-by-4 for railing on a second floor. The employee fell backward through an opening and landed on a concrete floor about 9.5 feet below, suffering broken vertebrae.
IDAHO FALLS, IDAHO—
Silver Crest Corp PO Box 51258
An employee was fixing plaster on a wall when they fell approximately 10 feet through a stair opening.
KISSIMMEE, FLORIDA—
Walt Disney parks & resorts
An employee was a spotter for a trap door that was being tested prior to a show. The trap door activated and the employee fell approximately 8 feet onto stunt mats that were covering the floor below. The employee sustained a fractured right shoulder, a dislocated right ankle, and a sprained left ankle.
BENTONVILLE, ARKANSAS—
Walmart, Inc.
An employee was moving a robot when they fell approximately 9 feet through a catwalk hole and landed on the floor. The employee sustained a head injury.
ONEILL, NEBRASKA—
Heritage Homes of Nebraska Inc
An employee was working in the attic of a modular home. As he was attaching a 2x4, the employee fell 9 feet through the ceiling to the ground. He sustained a fracture near the spinal cord.
More severe injuries in this industry (NAICS 331111)
NORTH JACKSON, OHIO—
Universal Stainless & Alloy Products Inc.
An employee used a crane to set down a bar. The bar measured 9 inches by 16 feet. The strap got stuck under the bar, and the employee asked another employee to jog the roll. The bar rolled and pinched the injured employee's left hand, resulting in a fingertip amputation.
MOUNT PLEASANT, TEXAS—
Priefert Manufacturing
An employee was loading a steel forming machine with steel to be processed. He went to move a cooling hose out of the way and his left thumb was crushed by the forming roller, resulting in injuries that required surgical amputation.
PUEBLO, COLORADO—
CF&I Steel L.P.
An employee was advancing a rail to line up for welding with a secondary rail on the weld line when his right middle and ring fingers were caught between the rails. The employee sustained an amputation to the top knuckle of the middle finger and a fracture to the ring finger. The machine was guarded at the time.
BRADDOCK, PENNSYLVANIA—
United States Steel Corporation
An employee was working near molten metal and experienced heat illness symptoms including cramps. The employee was hospitalized.
TAMPA, FLORIDA—
Tampa Bay Steel, LLC
An employee was preparing bundles of 24-foot square metal tubing to be loaded onto a truck and cut the safety band for a bundle. While the employee was removing a piece of dunnage from a bundle, they bumped the bundle with their leg. The metal tubing then fell forward and struck the employee, causing a fractured left ankle.
More severe injuries in COLORADO
GREELEY, COLORADO—
ABC Supply Company
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
BOULDER, COLORADO—
Burke Builders Inc
An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.
LONGMONT, COLORADO—
Circle Graphics, Inc.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
DENVER, COLORADO—
FLATIRON CONSTRUCTION CORP.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
BURLINGTON, COLORADO—
Takkion OPS Management
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.