Struck by object falling from vehicle or machinery-other than vehicle part · Soreness, pain, hurt-nonspecified injury
At a glance
Federal OSHA recorded a severe workplace injury
at Baker Hughes, 2065 Market Street, MIDLAND, TEXAS 79703
on — Soreness, pain, hurt-nonspecified injury, affecting the leg(s), unspecified.
Final narrative
An employee was using a forklift to load a pipe rack onto a third party's truck. After the pipe rack was placed, he got out of the forklift to help strap down the pipe rack. The pipe rack fell off of the truck onto his lower legs.
HospitalizedLeg(s), unspecifiedRacks-garment and other
During routine maintenance of the bonnet end cap on a blowout preventer, the cap fell and smashed an employee's right ring finger against another ram bonnet. The finger was amputated.
An employee was positioning an oilfield drill bit when it fell from the connection fixture it was connected onto. The bit fell onto the employee's left ring fingertip and crushed it against the work surface. The fingertip was medically amputated.
An employee was acting as a spotter and guiding a flatbed operator while standing on the rear passenger side of an outrigger leg when he stepped back onto a mobile crane platform and fell approximately 70 inches to the ground. He was hospitalized with an open fracture to the left ankle.
An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.
An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.
An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.
An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.
More severe injuries in this industry (NAICS 424690)
An employee was servicing a bypass feeder system. The system released hot water onto the employee, resulting in first- and second-degree burns to his face, chest, right arm, and both hands.
An employee was cleaning a formic acid hose with water when formic acid splashed his right shoulder, both arms, and his face under his face shield. He was hospitalized.
A driver had just climbed out of a truck. He stepped back to close the door and his foot went into a low spot on the ground. He fell backward onto an incline, rolled, and suffered a compound fracture to the wrist. He was hospitalized, requiring surgery.
An employee was walking between two tanks when he stepped into a sump pit that was missing its metal grate. His leg was submerged in sulfuric acid, and he suffered chemical burns to the lower part of his right foot. The employee was hospitalized.
An employee was delivering pool chemicals from a tanker truck when the pipe connection broke. The employee sustained chemical burns from the sodium hypochlorite.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.