Exposure to environmental heat · Effects of heat and light, n.e.c.
At a glance
Federal OSHA recorded a severe workplace injury
at COOPER TIRE & RUBBER CO., 3500 WASHINGTON ST., TEXARKANA, ARKANSAS 71854
on — Effects of heat and light, n.e.c., affecting the bODY SYSTEMS.
Final narrative
An employee was changing a tire in one of the presses when he reported that he had a light headache. His condition worsened to include nausea and blurry vision. The employee was taken to company healthcare provider and then to the emergency room. His illness was a result of dehydration.
An employee was overseeing the process of emptying a condensation pit into a relief pit. While observing a pump, hot steam from a condensation tank leaked out onto the employee resulting in first and second degree burns to their back, the backside of both arms, and the backside of both legs.
An employee was using a pry bar on a hot mold in a tire change press. His left pinky finger contacted the hot mold, resulting in a burn. He was hospitalized for an infection.
An employee was attempting to remove rubber from a mixer door when his left arm entered the mixer, resulting in a left middle finger amputation and crushed left ring finger.
On June 5, 2016, an employee was unloading a semi trailer using a forklift. She picked up a load, drove approximately 8 feet, and exited her lift. The forklift then rolled forward and pinned her between the load on the lift and another skid, breaking two legs and requiring hospitalization.
An employee was performing finishing work on a residential driveway when they began to experience body cramps and were hospitalized for heat stress and dehydration.
An agent was participating in SWAT team selection and was performing various physical fitness skills including running and exercise intervals. The agent experienced dehydration and a muscular injury that required hospitalization.
On September 26, 2023, an employee was delivering packages when he began to feel ill with a pain in his side. He was hospitalized for heat exhaustion and dehydration.
More severe injuries in this industry (NAICS 326211)
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was adjusting a pallet on a conveyor when it came off the conveyor and struck his right ankle, breaking the tibia and fibula. The employee was hospitalized.
At 2:45 p.m., an employee was outside the plant during a break before his next shift. He was speaking with an associate when he suddenly fell from the third-level steps to the ground, striking his head on the concrete. The employee was hospitalized due to internal brain bleeding, a wound to the back of his head requiring staples, and heat-related dehydration.
Two employees were replacing a motor on an overhead conveyor. The old motor fell to the floor, causing a piece of the concrete floor to fly up and strike the injured employee in the face, around the eye. The injured employee sustained a right orbital fracture, a zygomatic arch fracture, and a sphenoid fracture. The employee was hospitalized and required surgery.
An employee was changing the bladder on a hydraulic press. As he lowered the bladder, his left foot was pinned between its bottom ring and the bottom mold of the press. The second toe on the foot was amputated.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.