Sage Telecommunications Corporation

An employee was installing a down guy-wire on an overhead cable TV facility when the tail of the wire contacted the overhead powerline. The employee received an electrical shock and was hospitalized.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee was adjusting a cable reel that was loaded onto the forks of a forklift. The reel shifted and caught the employee's left index fingertip against the backrest, amputating it.

An employee was on an extension ladder, about 15-18 feet high, while spraying a wasp nest on a telecommunications pole. He fell to the ground and sustained fractures to his hip, requiring hospitalization.

An employee was moving a pan through the pan building and was struck by the superstructure of a crane, resulting in a fractured hip.

An employee was working from a ladder, pulling a cable line through a wall at a customer's house. He lost his balance and jumped off the ladder, landed on the ground about 7 feet below, and suffered injuries to both ankles including a fracture to at least one. The employee was hospitalized.

An employee was pulling inner duct from one handhole to another. The shackle on a winch cable contacted the cable sheave's roller block. The employee released tension on the winch cable and lifted the cable to guide the shackle over the lip of the handhole. As he re-engaged the winch, his left index fingertip became caught between components in the winch's retrieval wheel. The fingertip was amputated between the last knuckle and the nail.

An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.

An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.

An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.

A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.

An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.