Caught in running equipment or machinery during regular operation · Crushing injuries
At a glance
Federal OSHA recorded a severe workplace injury
at Lewis-Goetz and Company, Inc., 2113 S. West Street, Suite 200, WICHITA, KANSAS 67213
on — Crushing injuries, affecting the forearm(s).
Watch Lewis-Goetz and Company, Inc. — freeGet an email when a new federal OSHA severe-injury report for Lewis-Goetz and Company, Inc. is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee was doing a roll-up on the belt slitter machine when the belt buckled after he cut it. He turned away from the machine to get a stick to flatten the belt and slipped off the wooden box that he was standing on. While trying to catch his balance, he put his right hand down on the belt going under the roller. He turned the machine off, which caused the roller to drop and crush his right forearm.
HospitalizedForearm(s)Special process machinery, n.e.c.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 333922)
An installation technician for a wind turbine lift was using a chain hoist to move materials up a tower. The chain storage unit overflowed; the chain spilled and fell about 40-50 feet down the tower. It struck the injured employee in the face, causing fractures to their nose and cheekbones.
On November 25, 2024, at 9:00 a.m., two employees were moving a metal staging pallet that was located in an automation cell. The injured employee slipped and their left middle finger was crushed between the pallet and metal frame of the machine, resulting in an amputation to the finger padding.
On October 22, 2024, at approximately 10:15 a.m., an employee was forming a stand leg on a standard brake press. As they were readjusting the part, the tip of their right thumb was caught in the brake press, resulting in a partial amputation. The incident occurred during training.
An employee was cleaning welding debris from a steel part that was in a fixture. The part moved, cut through the employee's cut-resistant glove, and amputated their right middle fingertip.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.