JONESBORO, ARKANSAS—
Hytrol Conveyor Company, Inc.
Struck by object dropped by person · Avulsions, enucleations without bone loss
At a glance
Federal OSHA recorded a severe workplace injury at Hytrol Conveyor Company, Inc., 2020 Hytrol St, JONESBORO, ARKANSAS 72401 on — Avulsions, enucleations without bone loss, affecting the Other finger(s) n.e.c..
Final narrative
On November 25, 2024, at 9:00 a.m., two employees were moving a metal staging pallet that was located in an automation cell. The injured employee slipped and their left middle finger was crushed between the pallet and metal frame of the machine, resulting in an amputation to the finger padding.
More severe injuries at Hytrol Conveyor Company, Inc.
JONESBORO, ARKANSAS—
Hytrol Conveyor Company, Inc.
On October 22, 2024, at approximately 10:15 a.m., an employee was forming a stand leg on a standard brake press. As they were readjusting the part, the tip of their right thumb was caught in the brake press, resulting in a partial amputation. The incident occurred during training.
JONESBORO, ARKANSAS—
Hytrol Conveyor Company, Inc.
An employee was working in the power assembly area where chains are placed onto conveyors. As the employee went to retrieve a guardrail to put on a conveyor, they tripped over a spool of chain on floor and fell, sustaining a left femur fracture.
JONESBORO, ARKANSAS—
Hytrol Conveyor Company, Inc.
An employee was cooling off at a receiving dock after welding. He leaned on the plastic safety chain guarding the door and fell 5 feet 10 inches to the concrete surface below. He suffered a broken right leg and was hospitalized.
JONESBORO, ARKANSAS—
Hytrol Conveyor Company, Inc.
An employee was forming a part on a brake press machine when the employee's finger was pinched between the part and the die, resulting in a right index fingertip amputation and a broken right index finger.
JONESBORO, ARKANSAS—
Hytrol Conveyor Company, Inc.
An employee was working on a conveyor that had just been manufactured, testing its speed. A section of the conveyor was missing rollers; this exposed the V-belt and pulley sheave. As the employee measured the belt's speed, his left ring finger was caught between the V-belt and pulley sheave and was amputated.
View Hytrol Conveyor Company, Inc.'s full OSHA safety record →
Similar incidents · Same event type
PEACHTREE CITY, GEORGIA—
GS II Building Products, Inc.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
HAZLEHURST, GEORGIA—
Thompson Hardwoods, Inc.
An employee and co-worker were working to unjam and move a 100-pound piece of crossed-up cant timber. The employee lost their grip and the timber fell on their right hand, resulting in crush injuries to the fingers.
SEDALIA, MISSOURI—
Maxion Wheels LLC
An employee was working on a cushion ring (steel). As they lifted the cushion ring with both hands to flip it up, the ring slid down and the employee's right middle fingertip was crushed between the ring and the work table. The employee was hospitalized with a fracture, and their right middle fingertip was amputated.
TALLAPOOSA, GEORGIA—
HEXPOL Compounding PC, Inc.
Two employees were lifting a roll of steel poly bar (50 inches and approximately 150 pounds) from ground level to a height of 4 feet at the 66-inch rubber calendar. One employee dropped the roll, resulting in the poly bar contacting the injured employee's right knee. The employee was hospitalized with fractured right patella.
MACHESNEY PARK, ILLINOIS—
Macktown Construction Group
The injured employee was walking in front of the property by the front door as another employee was removing debris from the roof. The injured employee was struck by a 2 x 4 that was being cleared from the roof. He was knocked unconscious and sustained brain bleeding, as well as head and facial injuries, and required stitches.
More severe injuries in this industry (NAICS 333922)
PANHANDLE, TEXAS—
3S Americas, Inc.
An installation technician for a wind turbine lift was using a chain hoist to move materials up a tower. The chain storage unit overflowed; the chain spilled and fell about 40-50 feet down the tower. It struck the injured employee in the face, causing fractures to their nose and cheekbones.
JONESBORO, ARKANSAS—
Hytrol Conveyor Company, Inc.
On October 22, 2024, at approximately 10:15 a.m., an employee was forming a stand leg on a standard brake press. As they were readjusting the part, the tip of their right thumb was caught in the brake press, resulting in a partial amputation. The incident occurred during training.
JOHNSTON, RHODE ISLAND—
Dematic Corp
An employee was working on a ladder when he lost his balance and fell onto the conveyor rail, resulting in two broken ribs and hospitalization.
BURLESON, TEXAS—
KWS Manufacturing Company, Ltd.
An employee was cleaning welding debris from a steel part that was in a fixture. The part moved, cut through the employee's cut-resistant glove, and amputated their right middle fingertip.
MOUNT VERNON, MISSOURI—
Terex Mount Vernon
An employee was changing the dies of a brake press. They loosened the securement bolts on the upper die (approximately 6-feet long and weighing 200-pounds) and the upper die fell out of the press. The employee attempted to catch the die and their left middle and ring fingers were caught between the upper die and the bottom die, resulting in amputations.
More severe injuries in ARKANSAS
BLYTHEVILLE, ARKANSAS—
NATIONAL MILL MAINTENANCE, LLC
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
TEXARKANA, ARKANSAS—
The Goodyear Tire & Rubber Company
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
OSCEOLA, ARKANSAS—
Big River Steel, LLC
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
PINE BLUFF, ARKANSAS—
American Tile & Marble Co., Inc
An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.
SCRANTON, ARKANSAS—
Johnson Industrial Coatings, LLC.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.