Struck by object or equipment dropped by other person · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at HOOD INDUSTRIES INC., 224 DELTA PINE ROAD, BEAUMONT, MISSISSIPPI 39423
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee and coworkers were removing a roller from a veneer dryer by hand. The roller slipped out of a coworker's hands, and the employee's finger was trapped between the roller and the dryer. His left index finger was partially amputated.
An employee was loading logs onto a feeder chain into the chipper when his left hand was crushed between the throat of the chipper and the core. Two fingers were injured and surgically amputated.
An employee was washing a roof when he stepped to the edge of the roofline and fell to a chemical room below, and then to the ground. The employee suffered multiple fractures that required hospitalization.
An employee was making repairs on a dryer when a come-a-long chain holding a 250-pound diagonal brace broke. The brace fell and struck the employee's foot, fracturing it.
An employee was clearing a piece of wood from the infeed of a dryer. A sprocket caught his jacket, and the chain and sprocket abraded and burned the bottom and underside of his right upper arm.
An employee was setting up a molder machine. The employee ran a small piece of the wood through the machine and the wood splintered. While the employee was clearing the splintered wood, the bottom planer head crushed his left ring finger. The finger was later amputated.
The injured employee was standing at the base of a ladder assisting another employee install a TV on a wall. The TV was dropped, striking the employee. They sustained a head injury.
An employee and a colleague were moving two pieces of rebar when a tie was cut. The employee holding the rebar dropped it while it was above the injured employee's hands, resulting in partial amputation to their left middle finger.
An employee was bracing an extension ladder while his coworker installed a 10-foot, 40-45-pound pipe. The pipe fell onto the injured employee's head and he sustained a hematoma, C3 and C4 vertebral fractures and a forehead laceration.
An employee was helping to lift a press roll in to fix an issue that was occurring. A co-worker lost their grip and the press roll fell onto the injured employee's left index finger, resulting in a crush injury and amputation.
Three employees were removing equipment from an old fermentation room at a bakery. They were using two bakery dollies to remove metal plates from the floor of the room. One of them was holding one of the metal dollies with his right hand on the side of the dolly, as a plate was being centered on the two dollies. The plate slipped and struck his right thumb, which was amputated near the last joint.
More severe injuries in this industry (NAICS 321212)
An employee was working to dislodge a piece of stray veneer from a conveyor. The employee set up a ladder against the machine and climbed the ladder. He placed his left hand on the rail of the conveyor and his fingers were caught in the chain and sprocket assembly that powers the conveyor. Three fingers were amputated. The machine was guarded at the time.
A maintenance employee was changing a shaft on a piece of equipment that had been isolated for repair. While positioning the shaft into place, the shaft fell approximately two feet and pinched the employee's left index finger. The employee suffered a partial amputation of the fingertip without bone loss.
An employee was using a cart to move saw blades. The cart tipped over, striking and pinning the employee under the blades. The employee sustained severe lacerations to their torso and legs that required surgery.
An employee was labeling and writing on the back of a slab of quartz. The material was leaned toward him when the A-frame it was resting on shifted, causing the material to fall onto his right leg and break it.
An employee performed maintenance on various machines when they began to feel hot and unwell, and they experienced cramping. The employee was hospitalized with heat stress or dehydration.
An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.
The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.
An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.