CHECON CORPORATION

The employee was on top of a rail car to level the grain that was deposited into the car when they fell 13-15 feet to the ground. The employee sustained a right leg fracture.

An employee was on an extension ladder installing a satellite dish on a roof when they fell approximately 12-15 feet to the ground. The employee sustained fractures.

An employee was setting a 5-foot pry bar into a precast concrete slab and stood on the end of the pry bar to move the slab into place. The pry bar slipped out causing the employee to fall backward 15.5 feet to the dirt ground. The employee was hospitalized with a broken leg.

An employee was on a step ladder to measure and mark a crane rail for modification. The employee fell approximately 12 to 15 feet to the ground, resulting in a fractured right hip.

An employee was on a trailer securing a load of logs when they fell approximately 9-12 feet to the ground. The employee sustained brain hemorrhaging and lacerations to the thigh and above the eye. The employee was hospitalized.

An employee was operating a mica disc punch press. While the employee was working to clear material from the press, it cycled and amputated the tips of their left thumb and index finger. The press was guarded at the time of the incident.

An employee was repositioning a wire that would not advance in a crimping machine when the machine closed on her right index finger. The employee sustained a fingertip amputation.

An employee was repairing a benchtop wire processing machine that is used to make wire harnesses for commercial applications. A guard had been removed in order to access the components. The employee was testing the "trigger" sensor of the machine and adjusting the blades when the machine actuated and a blade amputated part of his left index fingertip.

An employee was moving a large safe weighing approximately 625 lbs. with a dolly that was specially-designed to move the safe. The safe fell from the dolly, struck the ground, fell forward onto the employee, striking their right hip/pelvis area before rolling off the employee onto the floor. The employee sustained a right hip/pelvic fracture.

An employee was checking the industrial waste stream as it discharged into a 4,000-gallon waste collection tank. The employee's right wrist was splashed with corrosive chemicals, resulting in hospitalization for a chemical burn.

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.

An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.

An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.

An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.