BAILEYVILLE, MAINE—
Cianbro Corporation
Struck by dislodged flying object, particle · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury at Cianbro Corporation, Main Street, BAILEYVILLE, MAINE 04694 on — Cuts, lacerations, affecting the leg(s), unspecified.
Final narrative
A worker cut a 4-foot x 6-foot x 5-inch piece of concrete slab from the operating floor, which fell toward the barricaded area in the basement. As the concrete slab fell, it struck a piece of equipment and was deflected to an area outside of the barricade. The slab then struck an employee standing nearby, lacerating the employee's leg.
More severe injuries at Cianbro Corporation
SKOWHEGAN, MAINE—
Cianbro Corporation
Employees were developing a plan to inspect/reinstall a perforated plate (precipitator transition piece) that dropped out from underneath the east inlet nozzle. The injured employee's left hand became caught in the plate when it slid, amputating their middle fingertip.
MOUNT VERNON, OHIO—
Cianbro Corporation
An employee had been drilling holes using a digger derrick. While he was trying to remove the auger, his ankle rolled and he fell off the machine's base plate to the ground. His ankle was broken.
LIVERMORE FALLS, MAINE—
Cianbro Corporation
Employee was climbing down from a pole after assisting CMP with storm restoration and fell to the ground. He was hospitalized with a heart attack and pneumonia.
View Cianbro Corporation's full OSHA safety record →
Similar incidents · Same event type
CROSS LANES, WEST VIRGINIA—
Lowe's Home Improvement
An employee was tossing a damaged toilet into a compactor. The toilet bounced off the compactor and lacerated the employee's right wrist, cutting an artery and tendon.
MOBILE, ALABAMA—
S & J Construction, LLC
An employee was operating a hydraulic jack to bend a frame when the jack came loose and struck the employee. They were hospitalized for a spleen injury.
KANSAS CITY, KANSAS—
RMVK Enterprise, INC.
A truck had been towed into the shop with a flat tire and a blown airbag. An employee checked the tire for damage and was airing the tire. The employee was installing the valve core when the bead slipped off the rim. Air escaped, and the aluminum wheel struck the employee's head and face. The employee became unresponsive and was bleeding.
FORT WORTH, TEXAS—
Dustrol Inc.
On December 14, 2023, at 8:40 p.m., three employees were inspecting milling machines for startup. A few of the sleeves on the mill drum needed to be changed out. The injured employee was trying to input a sleeve on the mill drum using a hammer. The hammer hit the edge of the drum, which caused a metal piece to splinter off and strike the employee's cheek just below the left eye. The metal splinter embedded in the back of their eye socket, resulting in pain, swelling, and bleeding that required hospitalization.
CARLYLE, ILLINOIS—
WalMart #436
An employee was pushing a line of carts into a vestibule when the door cable snapped and struck his right ankle. The employee suffered a fracture that required surgery and hospitalization.
More severe injuries in this industry (NAICS 237990)
SOUTH PORTLAND, MAINE—
HB Fleming, Inc.
A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.
BURLINGTON, COLORADO—
Takkion OPS Management
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.
PALM CITY, FLORIDA—
Ahtna Marine and Construction Company, LLC
Employees were securing the fuel line of an outboard motor in preparation for removing the motor from a small vessel located in the equipment yard. A gasoline-related fire occurred and one employee sustained burns to both hands and forearms.
MENOMONIE, WISCONSIN—
Michels Construction, Inc
A marine diver/construction worker was working underwater, using a hydraulic dredge to clear sediment away from the base of a dam. The dredge's suction nozzle began migrating toward him, and then pulled in his right hand and forearm. He sustained compartment syndrome in the hand and forearm.
PORT ISABEL, TEXAS—
Bechtel Energy Construction Services, Inc.
An employee was standing on a sheet of -inch by 4-foot by 8-foot plywood on top of a rebar mat, supervising his crew. As he was moving to alert the crew to an incoming overhead load, he stepped off the plywood and his left foot slipped through the rebar mat and landed on the rebar mat below. His left ankle was broken and dislocated.
More severe injuries in MAINE
SOUTH PORTLAND, MAINE—
HB Fleming, Inc.
A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.
SAINT ALBANS, MAINE—
GERRITY INDUSTRIES
Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.
AUGUSTA, MAINE—
O&P Glass
An employee was using a metal shear when it amputated the tip of his right index finger.
AUGUSTA, MAINE—
Cives Steel Company New England
An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.
BENTON, MAINE—
Longroad Energy
An employee was standing on a step stool, removing the nuts and bolts from the frame of a solar panel that was being replaced. The employee's cheek made contact with a connector with damaged insulation. The employee was shocked, briefly lost consciousness, and fell to the ground, suffering an injury to the left shoulder.