SKOWHEGAN, MAINE—
Cianbro Corporation
Struck by rolling, sliding, or shifting objects non-running · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury at Cianbro Corporation, 1329 Waterville Road, SKOWHEGAN, MAINE 04976 on — Amputations, avulsions, enucleations unspecified, affecting the Finger or thumb tip(s), nail(s).
Final narrative
Employees were developing a plan to inspect/reinstall a perforated plate (precipitator transition piece) that dropped out from underneath the east inlet nozzle. The injured employee's left hand became caught in the plate when it slid, amputating their middle fingertip.
More severe injuries at Cianbro Corporation
MOUNT VERNON, OHIO—
Cianbro Corporation
An employee had been drilling holes using a digger derrick. While he was trying to remove the auger, his ankle rolled and he fell off the machine's base plate to the ground. His ankle was broken.
LIVERMORE FALLS, MAINE—
Cianbro Corporation
Employee was climbing down from a pole after assisting CMP with storm restoration and fell to the ground. He was hospitalized with a heart attack and pneumonia.
BAILEYVILLE, MAINE—
Cianbro Corporation
A worker cut a 4-foot x 6-foot x 5-inch piece of concrete slab from the operating floor, which fell toward the barricaded area in the basement. As the concrete slab fell, it struck a piece of equipment and was deflected to an area outside of the barricade. The slab then struck an employee standing nearby, lacerating the employee's leg.
View Cianbro Corporation's full OSHA safety record →
Similar incidents · Same event type
CORSICANA, TEXAS—
Greenbrier Rail Services
An employee was using his left hand to push an axle down the line on a raised track work area while holding the remaining axle back with his right hand. A finger on his right hand was caught between the rail and the dust guard of the axle, resulting in a fracture and a laceration.
LAKE CITY, FLORIDA—
New Millennium Building Systems
An employee was moving metal out of a cart. He had removed one piece and was working to move another when the metal shifted. His right ring finger was crushed between the two pieces, and he suffered a partial amputation to the finger pad at the tip.
PITTSBURGH, PENNSYLVANIA—
Triad Metals International
A load of steel angles was being lowered when the lifting chain hit the load, causing it to slide toward an employee. An angle slid and pinched the employee, catching both of their legs between the beams and an angle. The employee suffered two fractured legs.
FORT WORTH, TEXAS—
Renegade Group LLC
Employees were replacing a 24" pig trap door. A strap was shackled on the pig trap door and connected to a forklift. Welders began to cut the door off. An employee was holding onto the door when the cut was finished. The door shifted and caught his fingers, resulting in a hand injury and amputation.
NORTH JACKSON, OHIO—
Universal Stainless & Alloy Products Inc.
An employee used a crane to set down a bar. The bar measured 9 inches by 16 feet. The strap got stuck under the bar, and the employee asked another employee to jog the roll. The bar rolled and pinched the injured employee's left hand, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 236220)
BOULDER, COLORADO—
Burke Builders Inc
An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.
VICKSBURG, MISSISSIPPI—
Hobby Lobby Stores, Inc.
The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.
JACKSONVILLE, FLORIDA—
Cross Management Corp.
An employee was installing insulation in a wall when she tripped on a hole (12" deep) and fell, hitting her head on the concrete floor. The employee sustained fractures to her leg and wrist, and lacerations to her head. The employee was hospitalized.
POST FALLS, IDAHO—
STEEL STRUCTURES AMERICA INC
An employee was loading a 4-inch wooden door into a pickup truck when he felt a pop in his right side behind his shoulder blade. He was hospitalized later that day and underwent surgery, having suffered a collapsed right lung.
HAZLEHURST, GEORGIA—
Trejo Concrete & Steel, LLC
An employee was operating a power drill when it slipped. The drill bit punctured the employee's hand and they were hospitalized.
More severe injuries in MAINE
SOUTH PORTLAND, MAINE—
HB Fleming, Inc.
A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.
SAINT ALBANS, MAINE—
GERRITY INDUSTRIES
Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.
AUGUSTA, MAINE—
O&P Glass
An employee was using a metal shear when it amputated the tip of his right index finger.
AUGUSTA, MAINE—
Cives Steel Company New England
An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.
BENTON, MAINE—
Longroad Energy
An employee was standing on a step stool, removing the nuts and bolts from the frame of a solar panel that was being replaced. The employee's cheek made contact with a connector with damaged insulation. The employee was shocked, briefly lost consciousness, and fell to the ground, suffering an injury to the left shoulder.