Imperial Aluminum - Minerva, LLC

While taping an aluminum reverb, an employee believed that molten metal was over-flowing the trough and melting oxygen lines on the floor. The employee then jumped over the handrail of an elevated work platform and fell approximately 5 to 6 feet to the floor below, injuring his left elbow and fracturing the left side of his hip.

An employee was working in the pit pulling impurities in the trough while facing backwards. The molten metal splashed and burned the employee's left leg. The employee received first and second degree burns to the thigh and calf areas.

An employee was walking back to her workstation. A forklift reversed a short distance, then completed a U-turn and struck her, running over her lower extremities. She was hospitalized with a broken ankle.

An employee was training on a jockey truck. Upon stepping out of the truck, the employee was struck by a rubber tire gantry crane, resulting in amputations of the right leg above the knee and left leg below the knee.

An employee was standing at the rear of a double pallet jack. Another double jack approached, and the employee's lower leg was caught between the two pieces of equipment. He suffered a broken tibia and fibula.

An employee was unloading large material bags on a loading dock. A forklift tine pinned the employee's foot against a pallet, causing the employee to fall and suffer a broken ankle.

An employee was pushing a container when they were struck by a forklift. The employee sustained a left leg fracture.

On July 29, 2025, an employee working near a metal furnace. Toward the end of his shift, he was charging a furnace and began to experienced heat exhaustion. He had also been in areas of elevated temperatures due to heat sources such as direct sunlight and a combustion engine. The employee was hospitalized with dehydration.

An employee was using a pry bar to remove a piece of aluminum cone from a mold on the cone line. The cone broke loose and the employee's left middle finger was caught between the pry bar and the cone line frame. The employee's fingertip was partially amputated.

On February 6, 2025, an employee was walking in the parking lot when they slipped and fell to the pavement, resulting in a concussion.

An employee was machining a trunnion using a grinding rig when their left hand was caught between the grinding stone and the trunnion, resulting in fractures to the middle, ring, and little fingers, as well as severe damage to the skin and amputations of the middle and ring fingers to the distal knuckle.

On August 7, 2024, a maintenance technician was descending a fixed cage ladder when the ladder broke and they fell approximately 12 feet to the concrete ground. The employee sustained head injuries and fractured ribs.

An employee was working to deliver mail to an apartment building. She was waiting for a customer to move, to obtain clearance to the mailboxes. The door swung inward and closed on her right little finger. The top half of her finger was surgically amputated.

An employee fell from a step ladder while reaching for a tie-off point. He impacted the ground, and landed on his bolt bag which contained tools. The employee was hospitalized with fractured ribs, and a lacerated spleen and kidney.

On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.

An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.

An employee was setting up communication equipment for a meeting. They were walking and tripped over a speaker on the ground. The employee sustained a leg injury.