Fall to lower level from collapsing structure or equipment 6 to 30 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Toyal America, Inc., 17401 S. Broadway, LOCKPORT, ILLINOIS 60441
on — Fractures , affecting the Rib(s), oblique area.
Final narrative
On August 7, 2024, a maintenance technician was descending a fixed cage ladder when the ladder broke and they fell approximately 12 feet to the concrete ground. The employee sustained head injuries and fractured ribs.
Hospitalized Rib(s), oblique area Fixed ladder or fire escape
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
An employee was standing on a multi-purpose ladder installing head flashing over a window. Their feet were approximately 6 feet off the ground and three rungs from the top. The employee lost their grip on the drill they were using and the ladder tipped over. The employee fell from the ladder to the ground, resulting in a fractured left wrist, bruised chest, and lacerations to their face and lip.
An employee was assembling a baker type scaffold. He was beginning to transverse down the scaffold, approximately six feet off the ground, when the scaffold tipped over and he fell. The employee was hospitalized with a fractured femur.
An employee was working from an extension ladder, installing a security camera. The ladder fell out from under the employee, who fell to the ground 12 feet below and broke his right femur.
More severe injuries in this industry (NAICS 331314)
On July 29, 2025, an employee working near a metal furnace. Toward the end of his shift, he was charging a furnace and began to experienced heat exhaustion. He had also been in areas of elevated temperatures due to heat sources such as direct sunlight and a combustion engine. The employee was hospitalized with dehydration.
An employee was using a pry bar to remove a piece of aluminum cone from a mold on the cone line. The cone broke loose and the employee's left middle finger was caught between the pry bar and the cone line frame. The employee's fingertip was partially amputated.
An employee was machining a trunnion using a grinding rig when their left hand was caught between the grinding stone and the trunnion, resulting in fractures to the middle, ring, and little fingers, as well as severe damage to the skin and amputations of the middle and ring fingers to the distal knuckle.
At 3:17 p.m. on July 17, 2024, an employee was using a shovel to clean molten metal from the surge bowl of an aluminum launder system when the metal splashed onto the employee's lower left leg. The employee suffered third-degree burns.
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.