Ace Glass Construction Corporation

Two employees were on a job site inspecting the area above the roof to see where the next storefront frame was going to be installed. They set up a ladder and the first employee began climbing while the second employee held the ladder for him. The ladder was sitting on a deck made of composite material that was damp from rain. The first employee was over 4 feet off the ground when the bottom of the ladder began to slip away from the building. He jumped as the ladder began to fall; when he landed, he suffered a compound fracture in his right lower leg and dislocated his right shoulder. He was hospitalized.

An employee was climbing a step ladder while carrying a 3-foot piece of conduit. As he went to reposition his feet on the ladder by pivoting, he slipped and fell from the third rung of a 6-foot ladder. The employee sustained fractures to the left femur, right elbow, and right ring finger.

An employee was descending a 4-step maintenance stand when she missed the bottom step and fell to the hangar floor. The employee suffered a left hip fracture.

An employee stopped a belt and was going to check it for missing packages. She fell backward 3-4 feet from an elevated platform and sustained a broken right arm.

An employee had just finished a routine concrete pour and was ascending the ladder to clean the concrete mixer truck. The employee lost their grip and fell approximately 2-3 feet, contacting the truck's bumper. The employee suffered rib fractures and a punctured lung.

An employee was performing duties as an expeditor. After opening the dock door, the employee scanned the barcode on the door of the truck and placed one foot on the truck and one foot on the dock. The truck drove out of the stall, causing the employee to fall 4 feet off the dock onto the concrete. The employee sustained fractures to the right side of the pelvis, elbow, and a left ring fingertip as well as injuries to the right wrist and bruising to the back and stomach.

An employee was operating a machine and went to remove a buildup of desiccant from the machine. Their right index finger was pinched between two moving parts, resulting in an amputation to the finger.

On September 3, 2025, an employee was working on the left-side charger of a tank. They were using a ratchet with an extension to make an adjustment to the sand seal when their right thumb was pinched between the ratchet and the running charger, resulting in an amputation at the first knuckle.

A forklift was placing an elevated load onto a truck. The forklift tipped forward and fell on the injured employee who was standing nearby. The employee sustained fractures to their hip and ribs, as well as leg muscle injuries.

At 12:09 p.m. on July 11, 2025, an employee was inspecting the dust collection system in a plant. The employee was checking an airlock to determine whether there was suction when their left index and middle fingers were pinched between the rotating rotor and the housing of the airlock. The employee suffered amputations of both fingertips without bone loss.

An employee was manually removing a bearing from a vertical washer brush. Due to the weight of the brush roll, it released and crushed his left ring fingertip resulting in amputation without bone loss.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.