The Swan Corporation

An employee was taking a part out of a press. The press's injector pin came down on his right big toe, crushing it. He was hospitalized.

An employee was cleaning a cordless drill. As they applied brake fluid to the drill and pulled the trigger, the fluid ignited. The employee suffered burns to the face, hands, and arms.

An employee was welding on a rack when sparks ignited residual diesel on his pants. The employee sustained first-, second-, and third-degree burns.

An employee was spraying glue to the floor of an enclosed cargo trailer. The fumes made contact with the heater causing a flash fire. The employee suffered burns to their face and right hand.

An employee was replacing a valve in the gas line to the fryer. The shutoff valve malfunctioned resulting in a gas leak that then ignited. The employee sustained burns requiring hospitalization.

An employee was using a torch when a hole in the oxygen line leaked gas that then ignited. The employee sustained burns to the left palm and wrist.

An employee was cutting a 7-foot pipe using a band saw. He went to wipe moisture off the pipe with a rag and the rag became entangled in the moving saw blade, pulling his right hand into the blade. The employee sustained a partial amputation to the fourth distal phalanx and third digit.

An employee was working in the grinding room on a production line for bathtubs. The tubs are laid on a conveyor and have wooden blocks for feet. The conveyor moves the tubs onto a saw that cuts off the wooden blocks. The saws are protected by expandable metal guards. The conveyor then moves the tubs through an area lined with coarse horsehair brushes before reaching the discharge area, where the employee was working. The employee was drilling a hole behind the metal guarding when their right hand went into the horsehair brush area and contacted a saw blade, resulting in a laceration on the back of their right hand that required surgery.

An employee was taking a part out of a press. The press's injector pin came down on his right big toe, crushing it. He was hospitalized.

An employee was cleaning saw dust off of a straight line rip saw after turning it off when his fingers contacted the blade that was still spinning, resulting in the amputations of the left middle and index fingertips to the first knuckle.

An employee was fusing two HDPE pipes in a machine when the machine amputated his left index and middle fingertips.

An employee fell while moving a water canister, resulting in fractures to four fingers on her right hand.

An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.

An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.

An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.

A temporary employee was carrying a nail gun through the warehouse when it hit his leg, activated, and fired a nail into the leg.