105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Special Metals Inc.

Fall from collapsing structure or equipment, unspecified · Fractures

Federal OSHA recorded a severe workplace injury at Special Metals Inc., 2009 S. Broadway, MOORE, OKLAHOMA 73160 on — Fractures, affecting the multiple back regions.

An employee was making deliveries from a flatbed trailer. As he was climbing down the attached ladder, a weld broke and he fell backward onto the hard surface of the lot, lacerating his head and left ear and fracturing his spine. He was hospitalized overnight.

Hospitalized Multiple back regions Semi, tractor-trailer, tanker truck

Special Metals, Inc.

An employee was taking inventory in a warehouse aisleway. A lift truck struck the employee, who suffered a jaw and neck laceration from a metal part of a storage rack.

Special Metals Inc.

An employee was pulling cut pieces from a Tsune saw with gloves on. The employee's glove got caught on the blade, pulling his finger into the vise and cutting the tip of his right middle finger off.

View Special Metals Inc.'s full OSHA safety record →

VON ALST OPERATING, LLC

An employee was on a step ladder applying glue to a panel when the ladder fell apart, causing the employee to fall to the floor. The employee sustained rib fractures.

AVI Foodsystems, Inc.

On December 5, 2023, an employee was loading product onto a freight elevator when the elevator fell with the employee inside. The employee sustained a right leg injury.

Sysco Central Alabama

On 11/28/2023, an employee was loading a cart with supplies to be delivered to a restaurant. He stepped onto a ramp to get into the back of a truck but the ramp fell to the ground, causing the employee to fall as well. The employee was hospitalized with a fractured ankle.

S R Products

An employee was climbing a 16-foot fiberglass extension ladder to access a roof so they could take measurements for a roofing quote. The employee had partially ascended the ladder when the ladder broke in half. The employee's foot was caught in a ladder rung resulting in an ankle fracture that required surgery.

CHI Health Good Samaritan Hospital

An employee was replacing a heating, ventilation, and air conditioning (HVAC) valve in a ceiling while standing on a ladder. The ladder collapsed while the employee was descending, causing them to fall to the floor. The employee sustained a broken wrist.

Triad Metals International

A load of steel angles was being lowered when the lifting chain hit the load, causing it to slide toward an employee. An angle slid and pinched the employee, catching both of their legs between the beams and an angle. The employee suffered two fractured legs.

Ryder System Inc.

An employee was on the deck of a trailer helping a customer unload tubes. The employee was working to place a cargo strap on the remaining tubes using a winch bar when it slipped off the tubing, causing him to lose his balance and fall headfirst onto the asphalt lot below. The employee suffered a contusion on his forehead, resulting in hospitalization.

EASTERN METAL SUPPLY, INC.

An employee and a customer were unloading two rectangular tubes. The tubes were wrapped together. The plastic wrap was cut so that one tube could be picked up. As the employee was lifting the top tube, the other tube (still connected to the top tube) came down onto his hand and broke two of his fingers. He was hospitalized.

TEXAS PIPE AND SUPPLY COMPANY

An employee was assisting as a forklift got pipe from a pipe rack. The employee was on one of the forklift's forks as it was raised to the top of the rack, a height of about 15 feet. He fell to the ground and suffered a dislocated and fractured right elbow.

United Performance Metals, LLC

On September 23, 2025, at approximately 7:43 p.m., an employee was using a knife to cut poly banding from a metal coil. The knife slipped, causing a laceration to the inside of their left arm at the elbow joint. The employee was hospitalized and required surgery to repair a damaged vein.

Rae Corporation

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

Meeco Sullivan

An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.

Edward Jones Investments

An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.

Burgess Manufacturing of Oklahoma Inc.

An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.