CATOOSA, OKLAHOMA—
Kloeckner Metals
Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Kloeckner Metals, 5250 Bird Creek Avenue, CATOOSA, OKLAHOMA 74015 on — Amputations, affecting the fingertip(s).
Final narrative
An employee was operating a crane via wireless remote to move a wrapped coil. The employee noticed the hooks began to slip, so the employee sat down the coil bundle and attempted to remove the paper wrapped around the coil. In doing so, one of the hooks jolted and caught the employee's right index fingertip, amputating it.
More severe injuries at Kloeckner Metals
AMARILLO, TEXAS—
Kloeckner Metals
A truck driver was walking on the catwalk of a truck when he slipped and fell to the ground. He sustained a torn right triceps and a lower left leg laceration that required stitches.
BUDA, TEXAS—
Kloeckner Metals
An employee was using an overhead crane to lift 25 pieces of 1/8" x 10" x 20 long flat bar material to block it for loading onto a tractor trailer. During the blocking process, the employee was installing the wood block when the chain in the overhead crane slipped out due to the bow of the material at the lifted height. The 25 pieces of material fell, smashing the employee's left gloved thumb between the wood block and the material. When he removed his hand, his thumb tip was amputated.
LOUISVILLE, MISSISSIPPI—
Kloeckner Metals
An employee fell off a truck, breaking his hand.
CHICAGO, ILLINOIS—
Kloeckner Metals
An employee was pressing the safety latch on a hoist hook and lowering a sheet lifter when his left thumb was caught between the safety latch and eye hook of the sheet lifter.
KILLEEN, TEXAS—
Kloeckner Metals
An employee was standing beside a tractor trailer when the 960-pound steel bundle that was being unload fell and struck the employee, breaking the left tibia and fibula and the right occipital bone.
View Kloeckner Metals's full OSHA safety record →
Similar incidents · Same event type
MECHANICSBURG, PENNSYLVANIA—
TForce Freight
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
DELAWARE CITY, DELAWARE—
Liveo Research, Inc.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
FORT WORTH, TEXAS—
Best Pump and Flow
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
BUFFALO, NEW YORK—
FORD MOTOR COMPANY
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
UNADILLA, GEORGIA—
Lasseter Tractor Company. Inc.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 423510)
PITTSBURGH, PENNSYLVANIA—
Triad Metals International
A load of steel angles was being lowered when the lifting chain hit the load, causing it to slide toward an employee. An angle slid and pinched the employee, catching both of their legs between the beams and an angle. The employee suffered two fractured legs.
BEDFORD PARK, ILLINOIS—
Ryder System Inc.
An employee was on the deck of a trailer helping a customer unload tubes. The employee was working to place a cargo strap on the remaining tubes using a winch bar when it slipped off the tubing, causing him to lose his balance and fall headfirst onto the asphalt lot below. The employee suffered a contusion on his forehead, resulting in hospitalization.
SARASOTA, FLORIDA—
EASTERN METAL SUPPLY, INC.
An employee and a customer were unloading two rectangular tubes. The tubes were wrapped together. The plastic wrap was cut so that one tube could be picked up. As the employee was lifting the top tube, the other tube (still connected to the top tube) came down onto his hand and broke two of his fingers. He was hospitalized.
HOUSTON, TEXAS—
TEXAS PIPE AND SUPPLY COMPANY
An employee was assisting as a forklift got pipe from a pipe rack. The employee was on one of the forklift's forks as it was raised to the top of the rack, a height of about 15 feet. He fell to the ground and suffered a dislocated and fractured right elbow.
HAMILTON, OHIO—
United Performance Metals, LLC
On September 23, 2025, at approximately 7:43 p.m., an employee was using a knife to cut poly banding from a metal coil. The knife slipped, causing a laceration to the inside of their left arm at the elbow joint. The employee was hospitalized and required surgery to repair a damaged vein.
More severe injuries in OKLAHOMA
PRYOR, OKLAHOMA—
Rae Corporation
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
EL RENO, OKLAHOMA—
U.S. Department of Justice/Federal Bureau of Prisons/Federal Correctional Institution-El Reno
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
MCALESTER, OKLAHOMA—
Meeco Sullivan
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
BARTLESVILLE, OKLAHOMA—
Edward Jones Investments
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
GUTHRIE, OKLAHOMA—
Burgess Manufacturing of Oklahoma Inc.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.