Union Tank Car

An employee suffered a fracture to their left arm when it was struck by a falling draft gear weighing approximately 250-300 lbs. The employee was using wooden blocks to stabilized the piece in preparation for welding operations when the piece fell off the wooden blocks and struck the employee.

An employee was loading a corn train and opening and closing the top hatches of the grain rail cars. As the employee unhooked the snap hook of their self-retracting lifeline (SRL) that was temporarily hooked to a rail car, the cars began to move. The employee's left index finger was caught between the snap hook and the rail car, resulting in partial amputation.

An employee was opening train car hatches on top of a train. The train was backing up to scan the cars in when the employee's foot became stuck. He was then dragged across two rail cars sustaining a concussion and a toe injury.

Two employees were opening lids on railcars to prepare the cars for loading on a track. Both employees were in full body harnesses and were connected by a self-retracting lifeline (SRL) to a rail fall safety system. The train started moving north and the employees realized that the cars were going to move beyond the fall protection coverage and decided to unhook from the rail fall protection. Employee 1 assisted the injured employee and unhooked from the system. As the injured employee attempted to unhook, the SRL ran out of cable, roughly 25 feet from the rail shed. The injured employee was pulled onto his back and remained stationary on his back, held by the SRL cable, as the rail cars moved under him. The employee sustained a laceration and contusion to the top of the head; bruising and scrapes to the lower back, legs and arms; a cut on the right hand; and a bruised thumb.

An employee was opening a train gate for a rail company. Before the employee could open the gate, the train struck the gate which knocked the employee down and rendered him unconscious. The employee sustained fractures to the skull and right eye socket.

An employee was riding on an amusement park's mountain ride. He lost his balance and came partly out of the cart; his arm hit the track and his arm was broken.

An employee was responding to a service request for a cable stripping machine that was making noise and not functioning consistently. While testing its function, the machine contacted the employee s right index fingertip, resulting in a fingertip amputation to the tuft.

An employee was using a handheld cordless electric torque wrench. The tool's reaction arm came into contact with the employee's left hand, causing an amputation to the middle finger above the first knuckle.

On August 6, 2025, an employee was preparing to weld a metal sheet that goes between containers and weighs 800 pounds. The employee was placing a two-foot wooden brace (4 by 4) under the metal, which was being raised by a crane operator using a magnet. The magnet shifted and caused the load to catch the employee's right index fingertip against the wooden brace, resulting in a fingertip amputation.

An employee was climbing up a ladder to the top of a railcar. The employee slipped and fell from the ladder, striking the coupler of the railcar during the fall. This caused the employee's body to shift, and they landed on their head/nose/face. The employee suffered broken ribs, a broken cheekbone, a broken nose, and internal bleeding.

An employee was climbing up a fixed ladder on a tank car. The employee fell from the ladder to the ground, 8 to 10 feet below, and broke both ankles.

A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.

A security employee was responding to an urgent call from staff regarding a violent patient. The employee tripped and fell on the floor outside of the stairwell. The employee sustained a closed head injury, contusion of the cerebrum without loss of consciousness, and a closed fracture of the distal end of the right radius.

A security employee was holstering her firearm when the gun discharged a bullet into her right leg. The employee was hospitalized.

A temporary employee was testing an electrical starter motor. He was placing tape on the starter while the breaker was not engaged, but the starter sent an arc flash that burned his hands and stomach.

An employee was walking on a sidewalk and stubbed his toe on an elevated portion of concrete, causing him to trip and fall. The employee's right knee was dislocated.