FPL FOOD, LLC

An employee was pulling cow hides out of a 12-foot-deep hide pool using a long handled, stainless steel hook. The employee was pulling the hides to the edge of the pool, locating the hole in the hide, and hanging the hide on a hide-chain hook for it to travel to the folding table. One end of the long hook got caught on the forward chain hook. Then quickly caught the second hide-chain hook. As the chain hooks got farther apart, the two hooks began to pull the long hook. The employee was attempting to pull the long hook out of the two hooks when their right thumb was caught in a pinch point, resulting in amputation.

An employee was unblocking a load chute when they sustained an amputation just below the right middle fingernail.

An employee was waiting to off-load a truck that was being backed up to the door when the dock plate malfunctioned. The employee was helping to lower the dock plate manually when the plate fell and broke the employee's left arm.

An employee was cutting meat using a buster saw. The employee's fingers were caught between the blade and the guide, and the blade amputated three fingers.

An employee was using a bandsaw. The product slipped out of the employee's hand and the bandsaw amputated the employee's right thumb, also breaking the index finger and lacerating the middle finger.

Two employees were pushing a lawn mower into a utility truck. The injured employee placed their hand at the left side of the lawn mower deck when they were struck by a blade. The employee's left middle and ring finger were lacerated.

An employee was inspecting and moving a wooden pallet when an exposed nail lacerated his right forearm.

A temporary employee was working in the shipping and receiving area while loading a truck with sheet metal. The employee went to put down the product when the sheet metal lacerated their left middle finger. The employee was hospitalized and the tip of the finger was medically amputated.

An employee was carrying a pressure-treated 2x6 board while plating a foundation. The employee put the board on an anchor bolt when a 3-inch sliver of wood got caught in his hand, resulting in a punctured tendon.

An employee was in the packaging area in a warehouse transporting a 5-foot tilt and roll ladder back to its storage location. The employee was pushing the ladder while standing inside of it when it began to tilt over. As the employee reached to stop the ladder from tilting, his right hand contacted the metal serrated platform. The ladder continued to tilt and as he pulled his hand free, the employee's right middle fingertip was amputated.

An employee was scraping dried glue from the top lid of a hot glue pot. His left hand slipped and came into contact with the hot glue. He then suffered burns to his hands and fingers as he tried to remove the glue. He was hospitalized.

An employee was in a scissor lift approximately 20 feet above the ground to place a plastic tarp on a catwalk in order to catch condensation. They positioned the lift opposite the work area and stepped out of the scissor lift onto an I-beam. The employee fell from the I-beam to the ground. The employee was hospitalized with a skull fracture on the right side of their head and injuries to the chest and both eyes.

A maintenance employee was called to look at a pallet conveyor machine where a chain had fallen off a sprocket wheel. When the employee grabbed the loose chain, a light sensor caused the machine to restart. This created a pinch point between the chain and sprocket that caught the employee's left little finger. The finger was surgically amputated at the second knuckle.

The injured employee was standing by one of the stationary computers along the wall. There was a half-pallet located approximately 3 feet behind the employee that consisted of 12-pound boxes stacked six boxes high. A forklift was transporting a pallet that came in contact with the stationary pallet behind the injured employee, causing four boxes to fall and contact their legs. The injured employee was hospitalized with leg injuries.

An employee was using a box strapping machine to place straps on boxes when his right middle finger was caught in the machine, resulting in an open fracture to the distal phalanx.

An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.

An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.