GENERAL MOTORS

An employee was moving a tool box when its top drawer started to open. While the employee was stabilizing the tool box and drawers, their left middle and ring fingertips were amputated through the nailbeds. The fingertips were surgically reattached.

An employee was assessing an overhead stamping press door for alignment issues when the counterbalance moved and their left thumb was caught between the chain and the sprocket. The thumb was amputated. The door was locked out/tagged out at the time but gravitational pull was not controlled.

An employee dropped off an empty dolly train and moved his tugger over to a full material train that was waiting. He was then walking around the material train to validate it, and was struck by a forward-moving forklift. The forklift tire rolled over the employee's right foot/toes, fracturing four toes. The employee was hospitalized.

An employee was conducting assembly line activities on the front driver's side of a van when she tripped and fell backward to the floor, landing on her back. The employee sustained a compression fracture to a vertebra.

An employee was driving a forklift when it struck a structural steel column, which separated the mast from the forklift. The right side of the employee's skull struck a front support post in the forklift cabin, and the employee suffered a neck fracture and a concussion.

An employee was unloading a truck when he experienced pain. He was hospitalized with a hernia.

An employee was cutting pipe when they sustained a laceration to the face. The employee was hospitalized.

An employee suffered two fingertip amputations while working at a plant.

On September 25, 2023, an employee was working in the body department installing doors, hoods, and tailgates. The employee finished their shift and was hospitalized later that evening for a back injury.

An employee was operating a scissor lift and fractured their right ankle.

An employee was using a battery-powered torque tool to fasten a bolt. The tool was activated and the socket of the tool rotated and pulled in their gloved left hand. The employee sustained a left index fingertip amputation.

An employee was inspecting a casted part that weighed 330 pounds. The part fell from a lift assist onto the employee, striking his upper right arm and head. He suffered burns to the upper right arm and was hospitalized.

An employee was reaching to hook her harness into a lanyard and began to experience abdominal pain. The employee sustained an umbilical hernia.

On June 4, 2025, an employee was skimming molten aluminum when it dripped down from the skimming spoon onto the employee's left pant leg, burning the top of their left foot. The employee was hospitalized and required surgery.

On June 3, 2025, the injured employee was setting a mold with a co-worker when the mold was displaced and caught their right hand against the stop block. The employee sustained a fracture and partial amputation of their middle finger.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.