Collision between a moving and standing vehicle, nonroadway · Traumatic injuries and disorders, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Lineage Logistics LLC, 2350 S 98th St, EDWARDSVILLE, KANSAS 66111
on — Traumatic injuries and disorders, unspecified, affecting the nonclassifiable.
Final narrative
On 10/06/2016, at approximately 1:15 p.m., an employee was cleaning walls in the warehouse from a scissor lift when a material handling equipment (MHE) operator struck the scissor lift. The lift tipped over and landed on a second MHE. The employee fell to the ground and was hospitalized with acute pain due to trauma.
An employee was stacking cases of product, each weighing approximately 10 - 20 pounds, onto a pallet inside a railcar. A pallet that was stored on an upper level dislodged and fell, striking the employee from behind. The employee sustained a dislocated left hip.
A turret forklift operator was reaching for a two-way radio when his finger contacted an energized (85V DC) wire on the forklift. The employee sustained an electrical shock and burn on his finger and was hospitalized.
On November 22, 2024, an employee was pulling a pallet of product from a second-level location using a high-reach lift. The pallet struck the pallet above it, causing the pallet on the third level to fall. The employee was struck by the falling pallet of 30-pound cardboard boxes filled with poultry products and he sustained fractures to his right tibia and fibula that required surgery.
Two employees were performing preventative maintenance on a machine. The injured employee noticed excess grease on the drive system and wiped it off with a rag while the machine was turned on and running at a slow speed. The rag was caught and the employee's hand was pulled into the drive system resulting in a partial amputation of his right index finger.
An employee was riding on a powered pallet jack near a sewer drain. The pallet jack hit a dip near the sewer drain, and the employee s left foot hit a clamp truck parked in a charging station. He suffered a cut to the big toe, as well as fractures in the toe and the foot.
An employee went to step off material handling equipment to grab their jacket when the throttle of the vehicle engaged. The vehicle reversed and the employee's left foot was crushed between two material handlers, resulting in a fracture.
An employee was working at a height of approximately 20 feet and was standing outside his forklift's basket attachment. His forklift was struck by another forklift, causing the employee to fall to the warehouse floor below. The employee sustained facial injuries, broke two ribs and an arm, and also suffered a head injury. The employee was wearing a harness at the time but it was not connected to an anchor point.
On November 8, 2023, an employee was operating a stand-up pallet jack in the warehouse. As he was backing up, the pallet jack struck the basket of a parked aerial lift. His right ankle became caught between the pallet jack and the aerial lift basket resulting in a fractured ankle.
On October 26, 2023, at approximately 12:00 PM, an employee operating a four wheeler was on their way to an off-property break location. The employee stopped the four wheeler near the administrative office to allow a log truck to exit the property. The log truck backed up, and the employee's left ankle was caught between the log truck trailer and the four wheeler, resulting in a fracture and laceration.
More severe injuries in this industry (NAICS 493120)
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
An employee was operating a double pallet jack. While he was pushing a pallet back, the pallet jack moved and the handle crushed his finger against racking.
An employee was offloading tools from a van and walking them over to the curb. He lost his footing and fell while carrying a jackhammer. The jackhammer fell and caught the employee's right little finger against the curb. The employee's finger was amputated.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.