Caught in running equipment or machinery during regular operation · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Gilster-Mary Lee Corporation, 10 Industrial Park, STEELEVILLE, ILLINOIS 62288
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was attempting to turn down the speed of production on a production line using the speed control, which was located on the bottom of the line. The guard had to be removed to run the shaft. The employee's right hand then came in contact with the bevel gear, completely amputating the right index finger.
AmputationFinger(s), fingernail(s), n.e.c.Food and beverage processing machinery-specialized, unspecified
More severe injuries at Gilster-Mary Lee Corporation
An employee was driving a forklift in reverse to move materials when the forklift ran into a skid that was up on a rack. A finger on the employee's right hand was crushed between the forklift support bar and the skid, resulting in an amputation to the finger.
An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.
An employee was cleaning a single-facer machine. The employee's fingertips were crushed between rollers in the machine. The employee was hospitalized, and the fingertips were medically amputated.
An employee was working on a pasta-making machine. The employee had removed and cleaned the screw. He was trying to line the screw up to slide it back into the barrel. When the screw was tapped with a mallet, his finger was caught between the screw and the wall of the barrel, causing an amputation to the finger.
On 6/18/2022, an employee had been driving a tow motor and putting finished products on the pallet wrapper machine when plastic wrap got jammed. The employee got off the tow motor and climbed onto the pallet wrapper to clear the jam. When he grabbed the wrap, his hand was pulled between the turntable and roller bed of the pallet wrapper. His hand was pinned/crushed causing broken bones in the right thumb and index finger. The machine was running at the time.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 311823)
An employee was driving a forklift in reverse to move materials when the forklift ran into a skid that was up on a rack. A finger on the employee's right hand was crushed between the forklift support bar and the skid, resulting in an amputation to the finger.
An employee was climbing in the spreader area to remove a pasta jam when his right little finger was cut by the rotary cut-off knife. The employee sustained a laceration and fracture, resulting in an amputation.
An employee was cleaning accumulated pasta from a jammed regrind machine. The employee's right ring fingertip was caught in the machine and was amputated.
An employee was retrieving a stuck cup from a feeder machine. The machine's cup cylinder arm returned to its "down" position, catching and breaking the employee's right forearm.
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.