A. ZEREGA'S SONS, INC.

An employee was running a line when the case elevator jammed. He climbed up to the level of an overhead conveyor belt and attempted to release the jam. His left arm was struck by the case elevator when the jam released, breaking it. The case elevator was guarded at the time of the incident.

An employee was attempting to unjam a mixer when the machine amputated two of his fingers.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

A temporary employee turned off a planer machine, opened the housing, and began clearing a jam. The machine's spinning blade caught his right hand and degloved the index finger.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was driving a forklift in reverse to move materials when the forklift ran into a skid that was up on a rack. A finger on the employee's right hand was crushed between the forklift support bar and the skid, resulting in an amputation to the finger.

An employee was climbing in the spreader area to remove a pasta jam when his right little finger was cut by the rotary cut-off knife. The employee sustained a laceration and fracture, resulting in an amputation.

An employee working in the production department reported feeling weak and confused. The employee was hospitalized for dehydration.

An employee was retrieving a stuck cup from a feeder machine. The machine's cup cylinder arm returned to its "down" position, catching and breaking the employee's right forearm.

An employee was unjamming a palletizer when their right thumb was amputated by the palletizer plate.

An employee tripped over a stool and fell on the floor, resulting in a left displaced mid-cervical femoral neck fracture.

An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.

An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.

An employee was inspecting a breaker box and turning on/off a circuit breaker when he was electrocuted.

An employee was walking on the sidewalk. When they stepped off the curb, they fell to the ground, resulting in fractures to their tibia, fibula, and a metatarsal.