NITTO AUTOMOTIVE INC

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

On July 16, 2025, at around 2:20 PM, an employee was drilling a hole in a metal bracket. One end of the bracket was secured in a vise. When drilling, the bracket twisted and wrapped around the employee's left index finger. The employee's fingertip was amputated near the top joint.

An employee was manually lifting a 2-inch roll of paper weighing 58 pounds onto the line when they suffered a lower back injury. The employee was hospitalized.

On April 14, 2025, an employee was adding material into a mixer for rubber manufacturing. The employee was removing a piece of rubber under the door of the machine when the machine was started. The employee's left hand was shut in the door and they were hospitalized with a fractured hand. The machine was not locked out/tagged out at the time.

An employee was driving a forklift after putting trash into the trash compactor. The forks of the lift struck uneven asphalt on the road, causing the forklift to abruptly stop. The employee bounced up and struck his head on the forklift cage, resulting in a skull fracture.

Two employees locked out/tagged out a screw for digging out rubber, which caused the paddle screw to get stuck. They removed the rubber from the paddle screw, removed the lock out/tag out, and restarted the machine. When it restarted, the injured employee's right leg became entangled in the paddle screw, resulting in a fractured leg.

An employee was readjusting a safety hook to remove hardware from gang forms when his feet slipped. He fell to the ground, resulting in a broken left arm and wrist.

An employee was on a step ladder in a store aisle, making room on shelving for merchandise. She fell from the step ladder to the floor, suffering two fractures in her left leg. She was hospitalized, requiring surgery.

An employee was closing the side cargo door to a company van. The tip of his finger got caught between the door and the door jamb, resulting in a partial amputation.

An employee lost his footing while climbing an inclined ladder. He stumbled down one step and was able to stabilize himself by holding the railing and twisting his body, but he suffered an internal abdominal injury and was hospitalized.

An employee was manipulating dies on a brake press. The press caught and crushed the employee's right forearm, resulting in hospitalization.