Wiggins, Inc.

An employee was cleaning off a pallet sorting machine. The employee jumped approximately two feet from the top of the pallet sorting machine to a lower platform. Upon landing, the employee's left ankle rolled, resulting in a fracture that required hospitalization.

An employee was working from the forth rung of an 8-foot step ladder installing radiator covers when the cover began to fall. The employee lost balance and jumped from the ladder, landing on his feet and sustaining a heel fracture.

An employee was standing on their flatbed truck adjusting a cargo pallet. He pulled one of the pallet boards and the board broke, causing the employee to lose his balance and jump 4 feet off the flatbed. The employee landed on a concrete surface and sustained a fractured left heel that required surgery.

An employee was cleaning a single screen machine that had been jammed by a garden hose. The employee exited the machine onto the belt guard and jumped from the belt guard to the ground three feet below. When he landed, he broke his left femur.

An employee was on a catwalk helping to lay down tubing when he lost his balance. The employee jumped approximately 42 inches to the ground and the 30-foot section of tubing struck his left shin resulting in a fracture that required surgery.

On September 30, 2025, at 1:45 a.m., an employee was operating a forklift to load materials on an outbound dock. His left foot became caught between the forklift and a pole, resulting in a broken big toe.

An employee was riding a horse in the horse corral/riding arena when the horse bucked multiple times. The employee performed an emergency dismount off the right side of the horse. When she landed, she fell backward in the sand, onto her back. The employee sustained a crushed vertebra.

An employee was pulling an electrical wire from a circuit. The wire contacted a live wire and created an arc flash. The employee sustained burns on their left side and arm.

An employee was operating a heat press machine. His right foot was caught between a paper roller and the heat press, resulting in amputation of a toe.

On 11/08/2024, an employee was working on piping a refrigeration condenser. Refrigeration condensers arrive from the factory with the internal piping pressurized and the end capped. The employee was cutting a capped refrigeration line when the cap blew off, striking the battery-operated saw he was using and knocking the saw it into his face. He was cut under the nose and struck on the head. The angle of the impact pushed metal fragments under his safety glasses and into his eyes. The employee sustained metal fragments in his eyes, lacerations to the face, and contusions to the head.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.