Part of occupant s body caught between vehicle and other object in nonroadway transport incident · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at EAST PENN MANUFACTURING COMPANY, INCORPORATED, 8742 Contton Hill Road, ALBURTIS, PENNSYLVANIA 18011
on — Fractures, affecting the arm(s), unspecified.
Final narrative
An employee was operating a stack truck to move a pallet of materials from the racks. When he backed up the truck to reposition it, his arm became jammed between the truck and a pallet of materials on the racking behind him. His arm broke.
HospitalizedArm(s), unspecifiedForklift, order picker, platform truck-powered
More severe injuries at EAST PENN MANUFACTURING COMPANY, INCORPORATED
An employee was recycling material by adding it to a molten lead pot. The employee came in contact with the molten lead and suffered burns to the lower back and shoulder.
An employee was about 4 feet up an 8-foot A-frame ladder, working on an overhead pipe. The employee's wrench slipped and they fell from the ladder. The employee suffered spiral fractures to the left tibia and fibula.
An employee was clearing a jam on a battery machine when their finger got caught between the machine and a battery case. The employee sustained a finger amputation.
An employee fell from a powered industrial truck to the floor after colliding with a stack of material. The employee suffered a back injury and broken hip.
An employee was training on an rolling container carrier on the dry, non-frozen storage side of the distribution center. She made a turn around the end cap and her right foot struck the rail protecting the endcap racking. The employee's foot was fractured.
An employee was a passenger in a utility vehicle that was driving up a hill on a wooded trail. As the vehicle made a right turn, three fingers on the employee's right hand were caught against a tree and fractured.
An employee was operating material handling equipment when their right foot was caught between the material handling equipment and a railing. The employee sustained fractures to the big toe and second toe.
An employee was operating a forklift when it collided with another forklift at an intersection. The employee suffered a broken lower right leg from a rack of battery plates on the forks of the other truck.
Four employees were moving a 400-pound flange to the ground when part of the load was released and the injured employee's hand became caught between the flange and the ground. The employee sustained a left middle fingertip amputation.
An employee was recycling material by adding it to a molten lead pot. The employee came in contact with the molten lead and suffered burns to the lower back and shoulder.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.