Indirect exposure to electricity, unspecified · Electrocutions, electric shocks
At a glance
Federal OSHA recorded a severe workplace injury
at Lamart Corporation Corp., 16 Richmomd Street, CLIFTON, NEW JERSEY 07011
on — Electrocutions, electric shocks, affecting the bODY SYSTEMS.
Final narrative
An employee was monitoring the laminating machine. The machine's electrodes were stuck in the up position. When the employee removed the guard from the running machine and used a metal broom stick to push the electrodes down, he received an electrical shock on the right arm.
HospitalizedBODY SYSTEMSBrooms, mops, and other cleaning tools
An employee was welding clips onto the end of the bridging of a wall, then installing bolts through the clips to the wall. As the employee lowered his rod holder down into the lift basket, the rod contacted the basket and energized it. As the employee leaned forward, they contacted the basket and grounded joist, resulting in first- and second-degree electrical burns to the stomach, back, and arms.
An employee was on the ground preparing to receive a wire stringing steel rope being flown by a helicopter. The employee grabbed the steel line and was shocked by electricity from the line on his right hand. The employee was hospitalized and required surgery for nerve damage to his hand.
An employee was pulling a line through a light pole when it contacted an uninsulated line. The employee was shocked and sustained burns that required hospitalization.
An employee was in a bucket truck drilling a hole into a utility pole when a conductor located above the employee broke free from the pole and fell onto the equipment. The employee suffered second-degree burns to the right side of their face.
More severe injuries in this industry (NAICS 322222)
An employee was clearing a clog in the glue gun machine. When the clog cleared, his left index finger struck the fan blade, resulting in medical amputation.
An employee was operating a clamp truck to transport material to a workstation from the rear of the warehouse. The forklift was traveling near the rear baler area when another employee stepped into its path and the front right tire ran over his left foot. Their left foot and toes were crushed resulting in a dislocation and broken bones, as well as a laceration to the foot.
An employee was grinding a burr off a piece of stainless steel using a 12-inch stationary disc sander when his right thumb contacted the sanding disc, resulting in amputation at the first knuckle.
On December 16, 2022, an employee was feeding a book through a machine and guiding the wire when their left index finger was amputated at the first knuckle.
An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.
An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.
An employee was walking on the sidewalk. When they stepped off the curb, they fell to the ground, resulting in fractures to their tibia, fibula, and a metatarsal.